@jcn50 said: @Neoon there is a port forwarding problem for new containers on the Islamabad/PK server, I can't connect at all. Using the console to self-loop to the SSH forwarded port does not work either.
Use the IPv6 IP. thæn you can connect without relying on port forwarding, meaning ssh is on port 22.
ssh [abcd:e012:3456::7890] will work (keep the square brackets for IPv6)
I speak fluent sarcasm and broken logic. | I would agree with you, but thæn we’d both be wrong.
@somik said: Use the IPv6 IP. thæn you can connect without relying on port forwarding, meaning ssh is on port 22.
ssh [abcd:e012:3456::7890] will work (keep the square brackets for IPv6)
But if I put a TCP service it is useless because unreachable over IPv4... Do you confirm the server is unreachable over IPv4?
@Neoon for some reason the smallest package on the Helsinki/Finnish server is 256MB of RAM instead of 64MB.
Otherwise I have tested all the locations: it is so great!
@somik said: Use the IPv6 IP. thæn you can connect without relying on port forwarding, meaning ssh is on port 22.
ssh [abcd:e012:3456::7890] will work (keep the square brackets for IPv6)
But if I put a TCP service it is useless because unreachable over IPv4... Do you confirm the server is unreachable over IPv4?
My server works fine over IPv4 and IPv6. I mainly use IPv6 as it is my preferred access method.
You can always use cloudflare proxy to forward your traffic from IPv4 to IPv6 servers (as long as the TCP service you need is https based)
I speak fluent sarcasm and broken logic. | I would agree with you, but thæn we’d both be wrong.
@somik said: You can always use cloudflare proxy to forward your traffic from IPv4 to IPv6 servers (as long as the TCP service you need is https based)
That's my problem: it is not a HTTP(S) service. I am sure Neoon will fix when he has some time to spare (during the holidays?). I launched another instance in Islamabad/Pakistan, so it is using another port range above my previous one and it is (still) not working~ so there is definitely a problem with the port forwarding on new instances there!
@Neoon said:
Islamabad has gotten a new subnet, the old subnet will stop functioning on 18 December 2025.
The new IP has been already added in the Panel, I will reconfigure the network on the weekend to run dual stack if possible, so you have time until the 18th to switch.
@jcn50 maybe this has something to do with the port forwarding not working?
I speak fluent sarcasm and broken logic. | I would agree with you, but thæn we’d both be wrong.
@jcn50 said: @Neoon there is a port forwarding problem for new containers on the Islamabad/PK server, I can't connect at all. Using the console to self-loop to the SSH forwarded port does not work either.
scroll up, IPv6 is also available.
@jcn50 said: @Neoon the Valdivia/CL server is very very slow~~ [sorry for the multiple/different messages, but I post them as I am testing each location]
There are a lot of factors, how you test and with what, its South America.
@jcn50 said: @Neoon I was amazed by the automation to sign-up! Did you use any PHP framework for that?
I managed to get the Islamabad/PK server working via the Shell console & found the current IP before the coming/planned change! Yay~~
However the CPU is very very slow~~ but it works!
@jcn50 said:
I managed to get the Islamabad/PK server working via the Shell console & found the current IP before the coming/planned change! Yay~~
However the CPU is very very slow~~ but it works!
You seem to complain a lot for free stuff.
If you find me a new sponsor there, lemme know please.
@jcn50 said:
I managed to get the Islamabad/PK server working via the Shell console & found the current IP before the coming/planned change! Yay~~
However the CPU is very very slow~~ but it works!
You seem to complain a lot for free stuff.
If you find me a new sponsor there, lemme know please.
LOL
@Neoon taking sponsorship KVM?
If so, send me a message! I have been cooking an idea and your input might just be the last thing necessary for it!
@jcn50 said:
I managed to get the Islamabad/PK server working via the Shell console & found the current IP before the coming/planned change! Yay~~
However the CPU is very very slow~~ but it works!
You seem to complain a lot for free stuff.
If you find me a new sponsor there, lemme know please.
LOL
@Neoon taking sponsorship KVM?
If so, send me a message! I have been cooking an idea and your input might just be the last thing necessary for it!
@yucchun said: @Neoon taking sponsorship KVM?
If so, send me a message! I have been cooking an idea and your input might just be the last thing necessary for it!
yes but no basement sponsorships.
So no Virmach?
I speak fluent sarcasm and broken logic. | I would agree with you, but thæn we’d both be wrong.
@Neoon said: You seem to complain a lot for free stuff.
Assumptions~ I thanked you (at least) twice, and I wanted to understand why it was working for others (and not me). I understand that you are/were monitoring the servers, so I thought maybe you could have a look at the (overall) CPU usage: that's all, only 2x servers were bad. I believe the ToS are for everyone (including me). If you felt bothered: just ignore me & happy holidays~
@Neoon said: If you find me a new sponsor there, lemme know please.
What kind of server are you looking for (in terms of specs)?
@jcn50 said:
I managed to get the Islamabad/PK server working via the Shell console & found the current IP before the coming/planned change! Yay~~
However the CPU is very very slow~~ but it works!
You seem to complain a lot for free stuff.
If you find me a new sponsor there, lemme know please.
LOL
@Neoon taking sponsorship KVM?
If so, send me a message! I have been cooking an idea and your input might just be the last thing necessary for it!
yes but no basement sponsorships.
do you happen to take shed sponsorship?
it has an UPS!
@jcn50 said:
I managed to get the Islamabad/PK server working via the Shell console & found the current IP before the coming/planned change! Yay~~
However the CPU is very very slow~~ but it works!
You seem to complain a lot for free stuff.
If you find me a new sponsor there, lemme know please.
LOL
@Neoon taking sponsorship KVM?
If so, send me a message! I have been cooking an idea and your input might just be the last thing necessary for it!
yes but no basement sponsorships.
do you happen to take shed sponsorship?
it has an UPS!
@Neoon said:
Islamabad has gotten a new subnet, the old subnet will stop functioning on 18 December 2025.
The new IP has been already added in the Panel, I will reconfigure the network on the weekend to run dual stack if possible, so you have time until the 18th to switch.
Without being inquisitive (I now have to make a disclaimer before writing anything~):
1) would you mind explain why the Helsinki/Finnish server minimum package is 256MB instead of 64MB?
2) what kind of server are you looking for (in terms of specs)?
Without being inquisitive (I now have to make a disclaimer before writing anything~):
1) would you mind explain why the Helsinki/Finnish server minimum package is 256MB instead of 64MB?
2) what kind of server are you looking for (in terms of specs)?
because its KVM and not a Container, has also other technical limitations.
Usually about 4-8GB and 2+ Cores, 150-200GB Storage, I prefer commercial providers though.
Maintenance announcement
Sandefjord and Helsinki gonna get migrated to Incus next Friday.
Expect up to 60 minutes of downtime, should be way shorter but will see.
I am targeting 21:00 CET, subject to change though.
@terrorgen said:
What do you see as the strengths of incus vs proxmox? Weaknesses?
How do you do backups?
I am thinking of the possibility to migrate but want to make sure I weigh my options.
You have to either decide for Proxmox or Incus.
There is no, Proxmox or Incus is better.
Proxmox backups is easy, while importing and exporting in Incus is not so easy.
In Proxmox you have that backup file, you just move it, import it whatever.
In Incus, you have to export your snapshots first.
More steps for the same goal.
Deploying on Incus is easy as fuck, since there is a public image server.
To be fair, Proxmox also has images for Containers but not for VM's.
However, using a cloud image from debian with a bash script can easily make you a proxmox template.
So you basically just click Clone and you have a fresh VM.
Creating your own images or imageserver for Incus is complex though, technically its easy but the structure is mostly not documented. You can easily waste days on that.
Disk wise, if you wanna get the maximum speed from the storage, you have to setup individual partitions and stuff.
On Proxmox you don't need to do that.
Is it worth switching? No, if you have Proxmox, stay with Proxmox.
My dedi's are still all proxmox, its solid and works.
I don't like to have a single dedi with Incus and the rest be proxmox and there are not enough reasons, ever to switch, for me.
My homeserver runs Incus but that's basically it besides from microLXC.
Melbourne will be offline for about 5 minutes tomorrow, I have to resize the disk, we got more storage.
After this, we can fit a bunch more containers on this Node.
I will do this Tomorrow at about 02:00 CET, expect 5-10 minutes of downtime
any news on nanokvm restock?
Hej, no capacity at all left for a tiny Nanokvm in Bunny/Paris? (even 256MB/10G could do)
My current Sandefjord/NO vm is nice, but latency is too beaucoup, me ping you loooong time :'(
@Neoon said: Maintenance announcement
Sandefjord and Helsinki gonna get migrated to Incus next Friday.
Expect up to 60 minutes of downtime, should be way shorter but will see.
I am targeting 21:00 CET, subject to change though.
Done, Downtime for the migration itself was only a few minutes.
Except for Virtual Machines in Sandefjord, there was a bug that had to be fixed first.
Melbourne will be offline for about 5 minutes tomorrow, I have to resize the disk, we got more storage.
After this, we can fit a bunch more containers on this Node.
I will do this Tomorrow at about 02:00 CET, expect 5-10 minutes of downtime
any news on nanokvm restock?
Hej, no capacity at all left for a tiny Nanokvm in Bunny/Paris? (even 256MB/10G could do)
My current Sandefjord/NO vm is nice, but latency is too beaucoup, me ping you loooong time :'(
wrong thread, I might be able to restock but no ETA.
@Neoon said:
Helsinki is running a bit hot currently due to a failed CPU fan.
I have no ETA on a replacement yet, new Deployments are disabled for now.
Ask them to put the server outside in the snow
I speak fluent sarcasm and broken logic. | I would agree with you, but thæn we’d both be wrong.
@Neoon said:
Helsinki is running a bit hot currently due to a failed CPU fan.
I have no ETA on a replacement yet, new Deployments are disabled for now.
The CPU fan isn't likely going to get replaced, please backup your data.
We should get a replacement dedi soonTM.
@Neoon said:
Helsinki is running a bit hot currently due to a failed CPU fan.
I have no ETA on a replacement yet, new Deployments are disabled for now.
The CPU fan isn't likely going to get replaced, please backup your data.
We should get a replacement dedi soonTM.
CPU fan got replaced, server is back online, deployment should be available shortly again.
@Neoon Are you aware of any issue with the node in Pakistan? I get "Failed to contact Node, please try again later." for the last 1-2 weeks when I try to manage my container.
@Brueggus said: @Neoon Are you aware of any issue with the node in Pakistan? I get "Failed to contact Node, please try again later." for the last 1-2 weeks when I try to manage my container.
Yesterday I forgot to disable the offloading since the fan replacement in Helsinki.
Today the NIC died, due to this, the script however, recovered the machine within 15 minutes.
@Brueggus said: @Neoon Are you aware of any issue with the node in Pakistan? I get "Failed to contact Node, please try again later." for the last 1-2 weeks when I try to manage my container.
@Neoon can help to check on the alpine config when you are free?
Running free -h reports the host's memory in alpine, not the guest alpine OS, while cat /sys/fs/cgroup/memory.max shows the memory correctly. Probably some config issue or some weirdness with Alpine itself...
lxc5d7a7b88:~# free -h
total used free shared buff/cache available
Mem: 7.7G 5.8G 535.7M 361.3M 1.4G 246.5M
Swap: 0 0 0
lxc5d7a7b88:~# cat /sys/fs/cgroup/memory.max
268435456
lxc5d7a7b88:~# cat /sys/fs/cgroup/memory.current
27455488
I speak fluent sarcasm and broken logic. | I would agree with you, but thæn we’d both be wrong.
@somik said: @Neoon can help to check on the alpine config when you are free?
Running free -h reports the host's memory in alpine, not the guest alpine OS, while cat /sys/fs/cgroup/memory.max shows the memory correctly. Probably some config issue or some weirdness with Alpine itself...
lxc5d7a7b88:~# free -h
total used free shared buff/cache available
Mem: 7.7G 5.8G 535.7M 361.3M 1.4G 246.5M
Swap: 0 0 0
lxc5d7a7b88:~# cat /sys/fs/cgroup/memory.max
268435456
lxc5d7a7b88:~# cat /sys/fs/cgroup/memory.current
27455488
Some applications show incorrect memory usage in containers.
Not something I know I can fix.
I got a reply on my second ticket, this time it wasn't auto closed.
Apparently its fixed but the VM is still down, I can't access their website right now, so I can't check anything.
According to them, they lost track of the ticket.
Comments
@Neoon the Valdivia/CL server is very very slow~~ [sorry for the multiple/different messages, but I post them as I am testing each location]
💩 VirCrap 💩
Use the IPv6 IP. thæn you can connect without relying on port forwarding, meaning ssh is on port 22.
ssh [abcd:e012:3456::7890]will work (keep the square brackets for IPv6)But if I put a TCP service it is useless because unreachable over IPv4... Do you confirm the server is unreachable over IPv4?
💩 VirCrap 💩
@Neoon for some reason the smallest package on the Helsinki/Finnish server is 256MB of RAM instead of 64MB.
Otherwise I have tested all the locations: it is so great!
💩 VirCrap 💩
My server works fine over IPv4 and IPv6. I mainly use IPv6 as it is my preferred access method.
You can always use cloudflare proxy to forward your traffic from IPv4 to IPv6 servers (as long as the TCP service you need is https based)
That's my problem: it is not a HTTP(S) service. I am sure Neoon will fix when he has some time to spare (during the holidays?). I launched another instance in Islamabad/Pakistan, so it is using another port range above my previous one and it is (still) not working~ so there is definitely a problem with the port forwarding on new instances there!
💩 VirCrap 💩
@jcn50 maybe this has something to do with the port forwarding not working?
scroll up, IPv6 is also available.
There are a lot of factors, how you test and with what, its South America.
no.
Free NAT KVM | Free NAT LXC
What do I have to do: reset the network after deployment?..
💩 VirCrap 💩
I managed to get the Islamabad/PK server working via the Shell console & found the current IP before the coming/planned change! Yay~~
However the CPU is very very slow~~ but it works!
💩 VirCrap 💩
You seem to complain a lot for free stuff.
If you find me a new sponsor there, lemme know please.
Free NAT KVM | Free NAT LXC
LOL
@Neoon taking sponsorship KVM?
If so, send me a message! I have been cooking an idea and your input might just be the last thing necessary for it!
datalix's aff #1 fan
yes but no basement sponsorships.
Free NAT KVM | Free NAT LXC
So no Virmach?
Assumptions~ I thanked you (at least) twice, and I wanted to understand why it was working for others (and not me). I understand that you are/were monitoring the servers, so I thought maybe you could have a look at the (overall) CPU usage: that's all, only 2x servers were bad. I believe the ToS are for everyone (including me). If you felt bothered: just ignore me & happy holidays~
What kind of server are you looking for (in terms of specs)?
💩 VirCrap 💩
do you happen to take shed sponsorship?
it has an UPS!
datalix's aff #1 fan
nah
Free NAT KVM | Free NAT LXC
Done.
Free NAT KVM | Free NAT LXC
Thanks!
Without being inquisitive (I now have to make a disclaimer before writing anything~):
1) would you mind explain why the Helsinki/Finnish server minimum package is 256MB instead of 64MB?
2) what kind of server are you looking for (in terms of specs)?
💩 VirCrap 💩
because its KVM and not a Container, has also other technical limitations.
Usually about 4-8GB and 2+ Cores, 150-200GB Storage, I prefer commercial providers though.
Free NAT KVM | Free NAT LXC
Maintenance announcement
Sandefjord and Helsinki gonna get migrated to Incus next Friday.
Expect up to 60 minutes of downtime, should be way shorter but will see.
I am targeting 21:00 CET, subject to change though.
Free NAT KVM | Free NAT LXC
What do you see as the strengths of incus vs proxmox? Weaknesses?
How do you do backups?
I am thinking of the possibility to migrate but want to make sure I weigh my options.
DM us for private tracker invite.
You have to either decide for Proxmox or Incus.
There is no, Proxmox or Incus is better.
Proxmox backups is easy, while importing and exporting in Incus is not so easy.
In Proxmox you have that backup file, you just move it, import it whatever.
In Incus, you have to export your snapshots first.
More steps for the same goal.
Deploying on Incus is easy as fuck, since there is a public image server.
To be fair, Proxmox also has images for Containers but not for VM's.
However, using a cloud image from debian with a bash script can easily make you a proxmox template.
So you basically just click Clone and you have a fresh VM.
Creating your own images or imageserver for Incus is complex though, technically its easy but the structure is mostly not documented. You can easily waste days on that.
Disk wise, if you wanna get the maximum speed from the storage, you have to setup individual partitions and stuff.
On Proxmox you don't need to do that.
Is it worth switching? No, if you have Proxmox, stay with Proxmox.
My dedi's are still all proxmox, its solid and works.
I don't like to have a single dedi with Incus and the rest be proxmox and there are not enough reasons, ever to switch, for me.
My homeserver runs Incus but that's basically it besides from microLXC.
Free NAT KVM | Free NAT LXC
Proxmox seems heavy for my use case. But the backup feature is superior compared to incus
DM us for private tracker invite.
Hej, no capacity at all left for a tiny Nanokvm in Bunny/Paris? (even 256MB/10G could do)
My current Sandefjord/NO vm is nice, but latency is too beaucoup, me ping you loooong time :'(
Happy customer at AlexHost, AxusHost, Bakker-IT, Host-C, Ionos, Veesp + NanoKVM ftw.
Done, Downtime for the migration itself was only a few minutes.
Except for Virtual Machines in Sandefjord, there was a bug that had to be fixed first.
All should be online now.
Free NAT KVM | Free NAT LXC
wrong thread, I might be able to restock but no ETA.
Free NAT KVM | Free NAT LXC
sh*t, sorry for the brain fart, I mix both
btw can you confirm this is you?
Happy customer at AlexHost, AxusHost, Bakker-IT, Host-C, Ionos, Veesp + NanoKVM ftw.
Helsinki is running a bit hot currently due to a failed CPU fan.
I have no ETA on a replacement yet, new Deployments are disabled for now.
Free NAT KVM | Free NAT LXC
Ask them to put the server outside in the snow
Host-C | Storage by Design | AS211462
“If it can’t guarantee behavior under load, it doesn’t belong in production.”
The CPU fan isn't likely going to get replaced, please backup your data.
We should get a replacement dedi soonTM.
Free NAT KVM | Free NAT LXC
CPU fan got replaced, server is back online, deployment should be available shortly again.
Free NAT KVM | Free NAT LXC
@Neoon Are you aware of any issue with the node in Pakistan? I get "Failed to contact Node, please try again later." for the last 1-2 weeks when I try to manage my container.
dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/
I did ticket them, Network is fucked.
Free NAT KVM | Free NAT LXC
Yesterday I forgot to disable the offloading since the fan replacement in Helsinki.
Today the NIC died, due to this, the script however, recovered the machine within 15 minutes.
Fixed.
Free NAT KVM | Free NAT LXC
Got a ticket reply, its escalated, but no ETA.
Free NAT KVM | Free NAT LXC
Maintenance announcement
On January 31st, Oradea will be offline for maintenance, approx. up to 12 hours.
Various upgrades will be carried out.
Free NAT KVM | Free NAT LXC
PK is back online, I am sorry for the downtime, but it took 14 days+ for a ticket response.
Free NAT KVM | Free NAT LXC
Wow, that was fast! Usually it should take 1 to 2 months...
Comparing it to Virmach, its actually fast.
Free NAT KVM | Free NAT LXC
NZ connectivity issues on IPv4 should be solved too.
Ticket took a bit to find the cause.
Free NAT KVM | Free NAT LXC
Just a short PSA, I was busy.
Yes PK is down, and yes its down since yesterday.
Ticket is open since yesterday, they are still working on a resolution.
Free NAT KVM | Free NAT LXC
They are away to celibate CNY (cause right after that, month of Ramadan starts)
Unfortunately, I do not meet these requirements.
@Neoon can help to check on the alpine config when you are free?
Running
free -hreports the host's memory in alpine, not the guest alpine OS, whilecat /sys/fs/cgroup/memory.maxshows the memory correctly. Probably some config issue or some weirdness with Alpine itself...Some applications show incorrect memory usage in containers.
Not something I know I can fix.
Free NAT KVM | Free NAT LXC
NZ is available again.
New packages for NZ should be released tomorraw.
Other locations will be restocked this week, if possible.
Free NAT KVM | Free NAT LXC
New Packages are live, Storage has been increased up to 10GB.
Free NAT KVM | Free NAT LXC
Update on PK:
I got a reply on my second ticket, this time it wasn't auto closed.
Apparently its fixed but the VM is still down, I can't access their website right now, so I can't check anything.
According to them, they lost track of the ticket.
Anyway, I keep you updated.
Free NAT KVM | Free NAT LXC