microLXC Public Test

Neoon

Hey,

If you are bored and wanna play around with a LXC container: https://microlxc.net/
Currently AU, JP, LA and CH are available, you can pick between 128 and 256MB packages.

As usual some requirements apply:

• Your account needs to be 6 months old
• You need to have at least 50 Posts
• You need to have at least 50 Likes

If you meet these, you can go on the website, and to verify that you are you, you need to post the token that will be given to you in this thread. The Bot will do the rest.

If stuff goes well, it will be publicly soon.
Please report bugs and suggestions.

PS: IPv6 is DHCP based in AU & CH but JP & LA needs Static config, which is automatically configured on Debian & Devuan but not on CentOS/Ubuntu needs to be done by hand yet. You can find your IPv6 in the Panel just substract -1 for the Gateway.

Brueggus

@Neoon said: As usual some requirements apply:

Posts and likes "from the past" do not add in, do they?

Neoon

@Brueggus said:

@Neoon said: As usual some requirements apply:

Posts and likes "from the past" do not add in, do they?

From the old LES forum? nah.
I have no data about that.

If you have Hostballs account, and meet the requirements you can do it there.

kuroneko23

JP VPS, that's rare

SuriCloud

What ever i do ,i get invalid os,then invalid location en then ivalid ssh keys??????

vyas

Token f0d2-d971-a89d-945a

I liked the new site !

Neoon

@vyas said:
Token f0d2-d971-a89d-945a

I liked the new site !

There was a bug in the regex, should work now.

@SuriCloud said:
What ever i do ,i get invalid os,then invalid location en then ivalid ssh keys??????

What browser are you using? Please give me more information what is broken.

SuriCloud

@Neoon said:

@vyas said:
Token f0d2-d971-a89d-945a

I liked the new site !

There was a bug in the regex, should work now.

@SuriCloud said:
What ever i do ,i get invalid os,then invalid location en then ivalid ssh keys??????

What browser are you using? Please give me more information what is broken.

Microsoft edge browser

CamoYoshi

That's really generous offering 128/256GB of disk space... I would have expected closer to say, 1.28GB or 2.56GB... if you want to be cute about it. Not that I'm complaining though... Hopefully once my account has aged here enough I'll apply for one. Thank you for offering this up!

NanoG6

@Neoon I’m new here.. but you know me on LET.. can I apply? ?

vyas

@CamoYoshi said:
That's really generous offering 128/256GB of disk space... I would have expected closer to say, 1.28GB or 2.56GB... if you want to be cute about it. Not that I'm complaining though... Hopefully once my account has aged here enough I'll apply for one. Thank you for offering this up!

You may want to re read. The offer is still generous though

Neoon

@SuriCloud said:

@Neoon said:

@vyas said:
Token f0d2-d971-a89d-945a

I liked the new site !

There was a bug in the regex, should work now.

@SuriCloud said:
What ever i do ,i get invalid os,then invalid location en then ivalid ssh keys??????

What browser are you using? Please give me more information what is broken.

Microsoft edge browser

I had a issue with the default checkbox in Edge.
So I replaced it with a custom one, works fine now.

If you get errors such as invalid means, you did not clicked on a package/location.
If for some reason, your public key does not fit, please send me an example so I can update the regex.

@CamoYoshi said:
That's really generous offering 128/256GB of disk space... I would have expected closer to say, 1.28GB or 2.56GB... if you want to be cute about it. Not that I'm complaining though... Hopefully once my account has aged here enough I'll apply for one. Thank you for offering this up!

The font is really good for clickbait but you should be able to see the dot.
I am thinking about updating the requirements at some point but no idea if its a good idea to bring them lower.

@NanoG6 said:
@Neoon I’m new here.. but you know me on LET.. can I apply? ?

LET will be added at some point, the hole point is to test the system so sadly you have to wait.

CamoYoshi

@Neoon said:

@CamoYoshi said:
That's really generous offering 128/256GB of disk space... I would have expected closer to say, 1.28GB or 2.56GB... if you want to be cute about it. Not that I'm complaining though... Hopefully once my account has aged here enough I'll apply for one. Thank you for offering this up!

The font is really good for clickbait but you should be able to see the dot.
I am thinking about updating the requirements at some point but no idea if its a good idea to bring them lower.

Yeah I clicked through and it made a lot more sense. Curse me for running a older laptop without font smoothing, I guess. LOL.

CamoYoshi

@Neoon
Here's what it looks like for me. I know, it's ugly but this PC is super low end and needs all the performance help it can get.

NanoG6

@Neoon Aaah okay, JP is oos anyway

schnafi

Sounds interesting... Especially with JP and CH this gets a tad more exotic.

Neoon

@CamoYoshi said:
@Neoon
Here's what it looks like for me. I know, it's ugly but this PC is super low end and needs all the performance help it can get.

I should change it to MB at some point.

@NanoG6 said:
@Neoon Aaah okay, JP is oos anyway

Nah not really no.
Most locations have 5 slots, which is far away from out of capacity.

So we come down to about 17 slots right now available for the tests.
Depending on what people choose, if they go with 256MB, it may hit the memory limit faster and then its less.

@schnafi said:
Sounds interesting... Especially with JP and CH this gets a tad more exotic.

The primary goal is, to go for exotic locations, that's why LXC.

xreann20

I need a time machine and a bot poster

Ouji

I'm not sure if I'm eligible. I don't have over 50 likes here, but I do have in the other LE forum.

Edmond

You haven't added this to LET yet? There's a option to choose LET already?

Regardless, this looks lovely, I just don't qualify with my LES account here as I don't come here often. Glad you're doing this, I've been very happy with my NanoKVM! Since this is getting set up, will you be phasing out NanoKVM in the future or how is this going to work?

seriesn

@Neoon said:
LET will be added at some point, the hole point is to test the system so sadly you have to wait.

Since this has been asked couple of times.

terrorgen

Tried getting one, get denied...
But I think I meet the requirement

Edit: tried again and it worked!

verjin

The fun part is LET is disabled

terrorgen

Deployed one in Melbourne, yay!

Iroshan464

I get invalid key error.
Not sure why.

foxone

Invalid key here as well

Neoon

@Edmond said:
You haven't added this to LET yet? There's a option to choose LET already?

Regardless, this looks lovely, I just don't qualify with my LES account here as I don't come here often. Glad you're doing this, I've been very happy with my NanoKVM! Since this is getting set up, will you be phasing out NanoKVM in the future or how is this going to work?

No.

@verjin said:
The fun part is LET is disabled

Yes.

@Iroshan464 said:
I get invalid key error.
Not sure why.

Send me an example, so I can update the regex.
SADLY we have to do input validation these days, fucking hackerz.

dev

Wow, nanokvm and now this! Any plan to add more slot for test in Tokyo soon? I do not qualify with my les account but do with my baller account.

foxone

bf0f-83b1-4941-1ddb OwO

vyas

I used Vivaldi browser on Mac, no problems faced . In case it helps someone ...

Will test out the system tonight. Great to have a setup in Japan

Iroshan464

7b82-e9da-03ed-a24d

Neoon

@dev said:
Wow, nanokvm and now this! Any plan to add more slot for test in Tokyo soon? I do not qualify with my les account but do with my baller account.

At some point, yes, but no ETA.

@foxone said:
bf0f-83b1-4941-1ddb OwO

Your request got stuck while in deployment, I did a reset.
Please apply again.

The location you want to deploy was under heavy packetloss at this time, which caused issues.
Yet, the system does a rollback but does not cancel the pending request.

vish

Kudos @Neoon looks like another great project. Keep up the good work

foxone

26d7-d40a-f519-5e27 trying again

Neoon

@verjin said:
The fun part is LET is disabled

Thanks to @FAT32 for the acceleration.
But the Thread does not exist yet, but will soonTM.

foxone

My vps still got stuck btw

Neoon

@foxone said:
My vps still got stuck btw

I see no error or anything stuck.
You have to complete the request within 30 minutes or it gets deleted.

I mean you posted a token right, so then you should enter a password for your account and if you do not do that within 30 minutes, the request gets cleaned up.

foxone

@Neoon said:

@foxone said:
My vps still got stuck btw

I see no error or anything stuck.
You have to complete the request within 30 minutes or it gets deleted.

I mean you posted a token right, so then you should enter a password for your account and if you do not do that within 30 minutes, the request gets cleaned up.

It got stuck on "deploying" and never told me anything

Neoon

@foxone said:

@Neoon said:

@foxone said:
My vps still got stuck btw

I see no error or anything stuck.
You have to complete the request within 30 minutes or it gets deleted.

I mean you posted a token right, so then you should enter a password for your account and if you do not do that within 30 minutes, the request gets cleaned up.

It got stuck on "deploying" and never told me anything

Yea the first time, you deployed in Swiss, due to heavy packetloss the system failed to deploy.
If your request is in deploy status, it won't get deleted, so if it would get stuck at some point, I can investigate it.

But if your request, is still in verification or account setup, it will get deleted after 30 minutes, of inactivity.
And since there is nothing stuck or a pending request in the database, your second request never reached deploy.

The system scanned your post, I found the entry in the database, so you should be on the account setup.

foxone

@Neoon said:

@foxone said:

@Neoon said:

@foxone said:
My vps still got stuck btw

I see no error or anything stuck.
You have to complete the request within 30 minutes or it gets deleted.

I mean you posted a token right, so then you should enter a password for your account and if you do not do that within 30 minutes, the request gets cleaned up.

It got stuck on "deploying" and never told me anything

Yea the first time, you deployed in Swiss, due to heavy packetloss the system failed to deploy.
If your request is in deploy status, it won't get deleted, so if it would get stuck at some point, I can investigate it.

But if your request, is still in verification or account setup, it will get deleted after 30 minutes, of inactivity.
And since there is nothing stuck or a pending request in the database, your second request never reached deploy.

The system scanned your post, I found the entry in the database, so you should be on the account setup.

Request rejected

Your request can get rejected for the following reasons:
You provided an invalid account
You do not meet the requirements
Using a VPN or Proxy

If you think there is an technical error,
please let us know.

Neoon

@foxone said:

@Neoon said:

@foxone said:

@Neoon said:

@foxone said:
My vps still got stuck btw

I see no error or anything stuck.
You have to complete the request within 30 minutes or it gets deleted.

I mean you posted a token right, so then you should enter a password for your account and if you do not do that within 30 minutes, the request gets cleaned up.

It got stuck on "deploying" and never told me anything

Yea the first time, you deployed in Swiss, due to heavy packetloss the system failed to deploy.
If your request is in deploy status, it won't get deleted, so if it would get stuck at some point, I can investigate it.

But if your request, is still in verification or account setup, it will get deleted after 30 minutes, of inactivity.
And since there is nothing stuck or a pending request in the database, your second request never reached deploy.

The system scanned your post, I found the entry in the database, so you should be on the account setup.

Request rejected

Your request can get rejected for the following reasons:
You provided an invalid account
You do not meet the requirements
Using a VPN or Proxy

If you think there is an technical error,
please let us know.

You select Hostballs and the Account there does not exist, so the system rejected it.

foxone

b81d-82d9-c497-224f

let's try

_MS_

I entered correct LET username but the message says 'Invalid username.'.

Neoon

@foxone said:

let's try

I changed the forum select, so there is not longer a default forum selected.
Also, there is now a notification, about that the request will expire in 30 minutes.

MS said:
I entered correct LET username but the message says 'Invalid username.'.

I updated the regex, so It will accept your username now.
Besides, as I said before, as long the LET thread is not posted, it wont work if you go on the website and select Lowendtalk.

Since you cannot post the token on LET.

Pwner

Is this IPv6 only or will there be an NAT IPv4 in the future?

Neoon

@Pwner said:
Is this IPv6 only or will there be an NAT IPv4 in the future?

It's IPv6 + NAT IPv4.

Pwner

@Neoon said:

@Pwner said:
Is this IPv6 only or will there be an NAT IPv4 in the future?

It's IPv6 + NAT IPv4.

Awesome! I'll have to wait until the LET thread to apply then, my LES account doesn't qualify but I believe the LET account should.

Ouji

@Neoon said: Since you cannot post the token on LET.

Oh, I was gonna ask if the token could be posted here. I guess not, so I will wait for the post there.

Neoon

@Ouji said:

@Neoon said: Since you cannot post the token on LET.

Oh, I was gonna ask if the token could be posted here. I guess not, so I will wait for the post there.

The Request is bound to the forum, you requested it from.
Otherwise, it would be exploitable aka someone could pick your username on LET and get a new account here to validate it.

Ouji

@Neoon said: The Request is bound to the forum, you requested it from.

Otherwise, it would be exploitable aka someone could pick your username on LET and get a new account here to validate it.

Although my username is taken here and there, I agree, that could work for other usernames of long standing users that are not yet registered here. I didn't thank of that. Thank you.

_MS_

@Neoon said:

MS said:
I entered correct LET username but the message says 'Invalid username.'.

I updated the regex, so It will accept your username now.
Besides, as I said before, as long the LET thread is not posted, it wont work if you go on the website and select Lowendtalk.

Since you cannot post the token on LET.

OK, that's right.