NanoKVM | Free NAT KVM | Multiple Locations

Asim

How do I fix it @Neoon OR if there is an ETA on the fix

Neoon

@Asim said:
How do I fix it @Neoon OR if there is an ETA on the fix

Nothing that can be done and no ETA on this.
https://bgp.he.net/AS44592#_prefixes6

All the prefixes are dead / dropped from the routing table.

Asim

@Neoon Whenever you have time, please review this and give 'VM.Monitor' Privileges to the proxmox users

https://capture.dropbox.com/o3dKtZOlj65tzwKL

Neoon

CDA is currently down for an ongoing maintenance, expected to be 6 hours.
Sadly, I wasn't aware of it, hence I could not publish an announcement before.

Neoon

@Asim said:
@Neoon Whenever you have time, please review this and give 'VM.Monitor' Privileges to the proxmox users

https://capture.dropbox.com/o3dKtZOlj65tzwKL

Sorry for the late reply, I forgot that.
This role won't give you anything more than help or info.

The access to proxmox is locked down quite a lot, it won't do much.
If you have any specific good reason to enable this, lemme know.

Neoon

The Maintenance should be done, Node is back, if you have any issues, lemme know.
So far everything looks fine and working.

Recently there have been some rumors about a new node, however I can't deny or confirm these, since I like to wait until its delivered and fully working.

yoursunny

IPv6 is borked in CDA location.

sunny@box2:~$ mtr -bwzc4 2606:4700::
Start: 2023-11-07T04:00:16+0000
HOST: box2                                                       Loss%   Snt   Last   Avg  Best  Wrst StDev
  1. AS400304 undefined.hostname.localhost (2606:a8c0:11:17::1)   0.0%     4    0.2   0.2   0.2   0.2   0.0
  2. AS???    ???                                                100.0     4    0.0   0.0   0.0   0.0   0.0

I'm obtaining address via autoconf / DHCPv6 / RA, and the first hop responds, so that I believe it's not my configuration problem.

Neoon

@yoursunny said:
IPv6 is borked in CDA location.

sunny@box2:~$ mtr -bwzc4 2606:4700::
Start: 2023-11-07T04:00:16+0000
HOST: box2                                                       Loss%   Snt   Last   Avg  Best  Wrst StDev
  1. AS400304 undefined.hostname.localhost (2606:a8c0:11:17::1)   0.0%     4    0.2   0.2   0.2   0.2   0.0
  2. AS???    ???                                                100.0     4    0.0   0.0   0.0   0.0   0.0

I'm obtaining address via autoconf / DHCPv6 / RA, and the first hop responds, so that I believe it's not my configuration problem.

Fixed, a route was missing after the migration.
The monitoring didn't pick it up though, thanks for letting me know.

Neoon

New Deployments will be able to pre-select disk space.
Be reasonable though, otherwise your request may be declined.

Shot²

No luck for us poor sods from the early days :'(

Neoon

@Shot² said:
No luck for us poor sods from the early days :'(

You can always ask to get your disk space increased.
Mostly depends on storage space available on the Node.

Jab

BIGGER DICKS ON REQUEST!

// I had no idea what to comment, just wanted to say I logged in so the system shows me as active, still running this ChangeDetection.io for VirMach billing status tickets. Tanks Neoon!

Neoon

This feature is now available, plus some stock has been cleaned up.

Neoon

Maintenance Announcement
On Friday the 24th this Week, roughly 20:00 UTC, I plan to carry out a maintenance to upgrade the current software stack that NanoKVM.net is running on.
I don't expect more than a few minutes of downtime, however, I shall announce a 30 minute window.

Neoon

@Neoon said:
Maintenance Announcement
On Friday the 24th this Week, roughly 20:00 UTC, I plan to carry out a maintenance to upgrade the current software stack that NanoKVM.net is running on.
I don't expect more than a few minutes of downtime, however, I shall announce a 30 minute window.

Done

dwight

a3647d2a0788a2a31f7dc0016ad6293af9ca6c7e

I plan to run jupyter notebook on the vps. I was using Google Colab in the past, but now I need to use PARI to do some number computing and Colab doesn't support it

Thank you!

Neoon

@dwight said:
a3647d2a0788a2a31f7dc0016ad6293af9ca6c7e

I plan to run jupyter notebook on the vps. I was using Google Colab in the past, but now I need to use PARI to do some number computing and Colab doesn't support it

Thank you!

Deployed.

Fritz

@Neoon said:
This feature is now available, plus some stock has been cleaned up.

Can we adjust spec for the deployed vps?

Neoon

@Fritz said:

@Neoon said:
This feature is now available, plus some stock has been cleaned up.

Can we adjust spec for the deployed vps?

Depends, what and which Node.

terrorgen

Logged in just now and got this message:

Error!
Unable to fetch Proxmox data, try to log out and log in again.

Neoon

@terrorgen said:
Logged in just now and got this message:

Error!
Unable to fetch Proxmox data, try to log out and log in again.

Have you tried logging in again?
Sometimes timeouts happen, I see no issue here.

terrorgen

I did several times and also before I posted this. Still there.

Neoon

@terrorgen said:
I did several times and also before I posted this. Still there.

Please say that next time, I did assume you only logged in once.
I did reset your proxmox account, try again.

terrorgen

Looks good now. Thanks.

Neoon

Announcement, Announcement
As I just have been informed a day ago, that the current Node in Eygelshoven will be discontinued in a few weeks.
Due to increasing costs, however, there will likely be a more power efficient replacement.

More details will be announced later.

Neoon

@Neoon said:
Announcement, Announcement
As I just have been informed a day ago, that the current Node in Eygelshoven will be discontinued in a few weeks.
Due to increasing costs, however, there will likely be a more power efficient replacement.

More details will be announced later.

We get a new dedi next week, once its setup, people can request to get a VM on the new Node.
So they should have enough time to migrate their stuff in-between the old and new node.

I will post here once the new Node is up.
KTS24 is discontinuing their old blade systems, hence the migration.

Ganonk

Neoon

If you have an existing KVM in Eygelshoven, you can send me a DM to get a new VM on the new Node.
The early your ask, the more time you will have to migrate.

If you don't send me a DM, I will send you a DM, however it would be nice if you do it from your side, less work for me.

albermonte

Token:
9cebfa235fb1886b25e33f3cce2871912da55c78

My plan is to use the VPS as a temp hosting for future self-hosted apps that I want to have in my home server, I don't have that home server yet so I want to start with a VPS to test and see how things work and be able to break stuff without any risk. My first idea was to host some mealie or similar and once that works fine and I have my own server, move the stuff to my server.

Thanks so much.

Neoon

@albermonte said:
Token:
9cebfa235fb1886b25e33f3cce2871912da55c78

My plan is to use the VPS as a temp hosting for future self-hosted apps that I want to have in my home server, I don't have that home server yet so I want to start with a VPS to test and see how things work and be able to break stuff without any risk. My first idea was to host some mealie or similar and once that works fine and I have my own server, move the stuff to my server.

Thanks so much.

You have to read the Requirements.

zeespeak

Hi,
Token: 5937fc8619b5648fd6b49e089284566812a16893
Purpose: For znc, eggdrop and other bots.

KenTech

Nice to see someone giving away vpses to lowendspirit members! I would also take one but i don't meet the requirements yet.

tenpera

ETA on VNC?

Neoon

@tenpera said:
ETA on VNC?

noVNC is available.
VNC is on older Proxmox nodes still broken, its fixed in the newer Proxmox Version.

tenpera

@Neoon said: VNC is on older Proxmox nodes still broken, its fixed in the newer Proxmox Version.

so, in a week or two, we'll see vnc?

Neoon

@tenpera said:

@Neoon said: VNC is on older Proxmox nodes still broken, its fixed in the newer Proxmox Version.

so, in a week or two, we'll see vnc?

Maybe, didn't test it yet.

jqr

b05efc119d6cb93ba7c6ffc5a96452dca95eca3e

Usage: messing with low memory/disk space NixOS, backup tang server.

Thanks again Neoon!

Neoon

@jqr said:
b05efc119d6cb93ba7c6ffc5a96452dca95eca3e

Usage: messing with low memory/disk space NixOS, backup tang server.

Thanks again Neoon!

Deployed.

Neoon

Maintenance Announcement
Most of the Nodes are still running Proxmox 7, which is EOL end of this month.
So they need to be upgraded, you can expect up to 30 minutes of downtime per Node.

I will start upgrading the Nodes next Friday (26.07) at around 20:00 CET, one by one.
Once its done, I will post here again.

R4in

b5f492c6f17e8475f8cd63824a7a41be76aeab6a

I would like to run Audiobookshelf, rclone for storage

Neoon

@Neoon said:
Maintenance Announcement
Most of the Nodes are still running Proxmox 7, which is EOL end of this month.
So they need to be upgraded, you can expect up to 30 minutes of downtime per Node.

I will start upgrading the Nodes next Friday (26.07) at around 20:00 CET, one by one.
Once its done, I will post here again.

Will be done on Sunday instead, same time though.

havoc

41a033760922ee59773dc33631410d4d85859cef

Usage will be searx and a http proxy. Low usage & will be secured so that it's not open - just me

Neoon

@havoc said:
41a033760922ee59773dc33631410d4d85859cef

Usage will be searx and a http proxy. Low usage & will be secured so that it's not open - just me

Will process your request shortly, currently migrating the website over to another server.

havoc

@Neoon said:

@havoc said:
41a033760922ee59773dc33631410d4d85859cef

Usage will be searx and a http proxy. Low usage & will be secured so that it's not open - just me

Will process your request shortly, currently migrating the website over to another server.

Thanks! No rush on mine

Neoon

@havoc said:

@Neoon said:

@havoc said:
41a033760922ee59773dc33631410d4d85859cef

Usage will be searx and a http proxy. Low usage & will be secured so that it's not open - just me

Will process your request shortly, currently migrating the website over to another server.

Thanks! No rush on mine

Deployed.

Neoon

@Neoon said:
Maintenance Announcement
Most of the Nodes are still running Proxmox 7, which is EOL end of this month.
So they need to be upgraded, you can expect up to 30 minutes of downtime per Node.

I will start upgrading the Nodes next Friday (26.07) at around 20:00 CET, one by one.
Once its done, I will post here again.

All nodes have been upgraded.
If you notice any issues, please lemme know.

jqr

> @Neoon said:
> All nodes have been upgraded.
> If you notice any issues, please lemme know.

My Valdivia node is not accessible. The Dashboard shows it's online, but clicking on Manage gives me an error: "Failed to contact Node, please try again later."

Just thought I'd led you know as you asked. No rush. Thank you for offering the service.

edit: Oops, wrong service. My bad.

Brueggus

@Neoon said:
If you notice any issues, please lemme know.

Could you check if there's any issue with IPv6 in Fremont? Gateway is reachable but nothing beyond.

default via fe80::4a8:e8ff:fe78:754d dev eth1 proto ra metric 1024 expires 1600sec hoplimit 64 pref medium
[root@vps129 ~]# ping6 fe80::4a8:e8ff:fe78:754d%eth1
PING fe80::4a8:e8ff:fe78:754d%eth1(fe80::4a8:e8ff:fe78:754d%eth1) 56 data bytes
64 bytes from fe80::4a8:e8ff:fe78:754d%eth1: icmp_seq=1 ttl=64 time=0.166 ms
64 bytes from fe80::4a8:e8ff:fe78:754d%eth1: icmp_seq=2 ttl=64 time=0.167 ms
64 bytes from fe80::4a8:e8ff:fe78:754d%eth1: icmp_seq=3 ttl=64 time=0.169 ms
64 bytes from fe80::4a8:e8ff:fe78:754d%eth1: icmp_seq=4 ttl=64 time=0.158 ms
^C
--- fe80::4a8:e8ff:fe78:754d%eth1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2999ms
rtt min/avg/max/mdev = 0.158/0.165/0.169/0.004 ms
[root@vps129 ~]# ping6 2a09::
PING 2a09::(2a09::) 56 data bytes
^C
--- 2a09:: ping statistics ---
9 packets transmitted, 0 received, 100% packet loss, time 8000ms

Neoon

@Brueggus said:

@Neoon said:
If you notice any issues, please lemme know.

Could you check if there's any issue with IPv6 in Fremont? Gateway is reachable but nothing beyond.

default via fe80::4a8:e8ff:fe78:754d dev eth1 proto ra metric 1024 expires 1600sec hoplimit 64 pref medium
[root@vps129 ~]# ping6 fe80::4a8:e8ff:fe78:754d%eth1
PING fe80::4a8:e8ff:fe78:754d%eth1(fe80::4a8:e8ff:fe78:754d%eth1) 56 data bytes
64 bytes from fe80::4a8:e8ff:fe78:754d%eth1: icmp_seq=1 ttl=64 time=0.166 ms
64 bytes from fe80::4a8:e8ff:fe78:754d%eth1: icmp_seq=2 ttl=64 time=0.167 ms
64 bytes from fe80::4a8:e8ff:fe78:754d%eth1: icmp_seq=3 ttl=64 time=0.169 ms
64 bytes from fe80::4a8:e8ff:fe78:754d%eth1: icmp_seq=4 ttl=64 time=0.158 ms
^C
--- fe80::4a8:e8ff:fe78:754d%eth1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2999ms
rtt min/avg/max/mdev = 0.158/0.165/0.169/0.004 ms
[root@vps129 ~]# ping6 2a09::
PING 2a09::(2a09::) 56 data bytes
^C
--- 2a09:: ping statistics ---
9 packets transmitted, 0 received, 100% packet loss, time 8000ms

Fixed, sorry for that.

rockinmusicgv

89d000a72288b04a2a5fd73522f42fff8f580fff

Hoping for a basic VPS for monitoring and some small services that is a bit out of band from what I currently have...