@ofit said: @Neoon I don't understand why you deleted me? Did I break some rule?
What? If you don't understand something, please ask again, before you saying stuff that isn't true.
I'm sorry. My mistake. When I login to the VPS and started installing packages, the VPS hung. After that, ssh didn't respond. I tried to go into the NanoKVM panel, it did not work either. It turned out that the wrong password was copied for the panel. Now the VPS is working. Look like because of a bad network was promblems, the ping to me is 180-190 from the VPS.
And i like how panel look. Did not think that is proxmox vm.
@ofit said: @Neoon I don't understand why you deleted me? Did I break some rule?
What? If you don't understand something, please ask again, before you saying stuff that isn't true.
I'm sorry. My mistake. When I login to the VPS and started installing packages, the VPS hung. After that, ssh didn't respond. I tried to go into the NanoKVM panel, it did not work either. It turned out that the wrong password was copied for the panel. Now the VPS is working. Look like because of a bad network was promblems, the ping to me is 180-190 from the VPS.
I want to deploy NDN-FCH 2021 application on NanoKVM.
What is NDN-FCH?
NDN-FCH 2021 is an online service for finding available Named Data Networking routers near the client on the global NDN testbed and other connected networks.
It has health probes to check availability of each router over UDP, WebSocket, and QUIC.
It has an API service to allow queries for the nearest routers supporting a specific transport protocol.
The health probes use 20% CPU for one minute, once every five minutes.
The API service has minimal CPU usage.
Why NanoKVM?
Most of my paid servers are already running a router.
If I install the health probe on the same server, it cannot detect a connectivity issue that only affects external connections.
NDN-FCH is designed to be deployed with Docker Compose.
microLXC cannot run Docker.
NDN-FCH is currently deployed on LigaHosting trial VPS, but it is suffering from frequent connectivity issues.
NanoKVM CDA location appears have better connectivity, as seen by Crunchbits looking glass.
We accept Karma donations for the last flan. 🍮 affbrr
I want to deploy NDN-FCH 2021 application on NanoKVM.
What is NDN-FCH?
NDN-FCH 2021 is an online service for finding available Named Data Networking routers near the client on the global NDN testbed and other connected networks.
It has health probes to check availability of each router over UDP, WebSocket, and QUIC.
It has an API service to allow queries for the nearest routers supporting a specific transport protocol.
The health probes use 20% CPU for one minute, once every five minutes.
The API service has minimal CPU usage.
Why NanoKVM?
Most of my paid servers are already running a router.
If I install the health probe on the same server, it cannot detect a connectivity issue that only affects external connections.
NDN-FCH is designed to be deployed with Docker Compose.
microLXC cannot run Docker.
NDN-FCH is currently deployed on LigaHosting trial VPS, but it is suffering from frequent connectivity issues.
NanoKVM CDA location appears have better connectivity, as seen by Crunchbits looking glass.
@ofit said: @Neoon Hello. How to create a second vps? or how to change the location? It asks me to create an account again when I already have an account
@ofit said:
Neoon Hello. How to create a second vps? or how to change the location? It asks me to create an account again when I already have an account
@ofit said:
Neoon Hello. How to create a second vps? or how to change the location? It asks me to create an account again when I already have an account
double quota only on microLXC
You do not have an available European location. NanoKVM did not have a European location, so I took America, but it has a very high ping before me.
@ofit said:
Neoon Hello. How to create a second vps? or how to change the location? It asks me to create an account again when I already have an account
double quota only on microLXC
You do not have an available European location. NanoKVM did not have a European location, so I took America, but it has a very high ping before me.
microLXC is not getting restocked anytime soon.
If something gets free, its because someones vps did expire or someone switched Locations.
For NanoKVM, I asked 3 sponsors, One is confirmed for US.
However, nothing for EU yet, I was hoping to get another EU location for more stock.
I've already been using NANOKVM EU NL for 2 days with shadowsocks, dante, ADGuard and everything works just fine. Really did not expect this from a free product.
@ofit said:
I've already been using NANOKVM EU NL for 2 days with shadowsocks, dante, ADGuard and everything works just fine. Really did not expect this from a free product.
Token: 6310ff5732446816490c8ecf40eef0a3d8a3fa25
I'm hoping to get one of these to use as a dev server for a couple JS projects I'm working on, namely Lavalink which is an audio sharing backend for discord & teamspeak bots - would be really hand to test out the docker builds on.
edit: typos
@beanman109 said:
Token: 6310ff5732446816490c8ecf40eef0a3d8a3fa25
I'm hoping to get one of these to use as a dev server for a couple JS projects I'm working on, namely Lavalink which is an audio sharing backend for discord & teamspeak bots - would be really hand to test out the docker builds on.
edit: typos
Regarding our Node in Eygelshoven.
I suggest you take a backup, if your data is important.
Context, a datacenter (GLOBE datacenters), recently has been raided by the police and has been deconsecrated.
The Owners of this Datacenter, own also Skylink, in Eygelshoven.
I don't know as of Today, what will happen tomorrow.
Maybe this is getting resolved one way or another, but things don't look good as of now.
Sadly, I don't have any spare capacity as of right now, I cannot migrate anyone currently.
As precaution, take a backup.
Yes I am aware, I send them a Ticket on Wednesday, however my Ticket vanished due to a database issue.
I noticed this on Thursday, I wrote them again, still waiting for a fix, no response yet since 3 days+
I was suddenly transported back to my childhood wondering if I'm "tall enough" for the ride or if I have to wait a couple months to get on it. I guess I'll wait a couple months... hahaha
I was suddenly transported back to my childhood wondering if I'm "tall enough" for the ride or if I have to wait a couple months to get on it. I guess I'll wait a couple months... hahaha
It was done to reduce the number of abusers who, once banned, just creates a new account to get access again. It does cause problems for new members of the forum, but it is a necessary evil to ensure the service is not abused.
I speak fluent sarcasm and broken logic. | I would agree with you, but thæn we’d both be wrong.
Comments
@Neoon I don't understand why you deleted me? Did I break some rule?
What? If you don't understand something, please ask again, before you saying stuff that isn't true.
Free NAT KVM | Free NAT LXC
I'm sorry. My mistake. When I login to the VPS and started installing packages, the VPS hung. After that, ssh didn't respond. I tried to go into the NanoKVM panel, it did not work either. It turned out that the wrong password was copied for the panel. Now the VPS is working. Look like because of a bad network was promblems, the ping to me is 180-190 from the VPS.
And i like how panel look. Did not think that is proxmox vm.
No worries.
Free NAT KVM | Free NAT LXC
Token: 75a6b3ffb430eba3298831133a84f08a3578fa30
I want to deploy NDN-FCH 2021 application on NanoKVM.
What is NDN-FCH?
NDN-FCH 2021 is an online service for finding available Named Data Networking routers near the client on the global NDN testbed and other connected networks.
It has health probes to check availability of each router over UDP, WebSocket, and QUIC.
It has an API service to allow queries for the nearest routers supporting a specific transport protocol.
The health probes use 20% CPU for one minute, once every five minutes.
The API service has minimal CPU usage.
Why NanoKVM?
Most of my paid servers are already running a router.
If I install the health probe on the same server, it cannot detect a connectivity issue that only affects external connections.
NDN-FCH is designed to be deployed with Docker Compose.
microLXC cannot run Docker.
NDN-FCH is currently deployed on LigaHosting trial VPS, but it is suffering from frequent connectivity issues.
NanoKVM CDA location appears have better connectivity, as seen by Crunchbits looking glass.
We accept Karma donations for the last flan. 🍮 affbrr
Deployed.
Free NAT KVM | Free NAT LXC
very nice
Maintenance is done, reboots just took longer than expected, hence the delay.
Free NAT KVM | Free NAT LXC
Restocked Eygelshoven (NL).
Free NAT KVM | Free NAT LXC
ca75e25aa360a6f810601083f97838888ffc9247
Staging area for a small analytic project. Thanks
You need to read the req.
Free NAT KVM | Free NAT LXC
I did. But it seems I have been less talkative than I thought these last months.
Never mind.
1d746421bad19d821e407533176db5457d021d2c
1.some web test
2.vpn (very small usage)
thank you very much
1d746421bad19d821e407533176db5457d021d2c
1.some web test
2.vpn (very small usage)
thanks a lot
I think @.bobqu will post his token here👀
Not yet, he's still cooking
This is Bob. He's an idiot. Don't be like Bob.
No, you applied 2x times without reading the Requirements.
Then you Spammed.
Applied the 3rd Time.
No thanks.
Free NAT KVM | Free NAT LXC
I have hit all the requirements, "3+ months after registration, 15+ Posts in the recent 3 months, 50+ posts in total"
No guarantees with free service - @Neoon decides what goes. Spamming to meet the requirements was a dumb move. 🫠
SPAM definition: irrelevant or inappropriate messages sent on the internet to a large number of recipients.
anyone who calls accidental one more post as SPAM must kid us.
a little power exploited to the extreme, is it the only power he can have?
Whatever man, no VM either way.
@Neoon Hello. How to create a second vps? or how to change the location? It asks me to create an account again when I already have an account
You can't, we don't offer that.
Free NAT KVM | Free NAT LXC
double quota only on microLXC
You do not have an available European location. NanoKVM did not have a European location, so I took America, but it has a very high ping before me.
microLXC is not getting restocked anytime soon.
If something gets free, its because someones vps did expire or someone switched Locations.
For NanoKVM, I asked 3 sponsors, One is confirmed for US.
However, nothing for EU yet, I was hoping to get another EU location for more stock.
Free NAT KVM | Free NAT LXC
miss communication detected
he want migration to Eygelshoven (NL) on NanoKVM
Its not the first time.
@ofit Please us a better translator or ask a friend to translate it for you.
Otherwise this will lead to more miss communication.
If you want a migration you have to say it and drop me a PM.
Free NAT KVM | Free NAT LXC
LOL 🤣
I've already been using NANOKVM EU NL for 2 days with shadowsocks, dante, ADGuard and everything works just fine. Really did not expect this from a free product.
Nice offer!
yeah
Indeed
Virmach Deals
Token: 6310ff5732446816490c8ecf40eef0a3d8a3fa25
I'm hoping to get one of these to use as a dev server for a couple JS projects I'm working on, namely Lavalink which is an audio sharing backend for discord & teamspeak bots - would be really hand to test out the docker builds on.
edit: typos
cum laude bongineering
Deployed.
Free NAT KVM | Free NAT LXC
Eygelshoven 2 Seems to be offline
Why?
From the looks of it, the DC seems to be offline.
At least the IP's I tested, they should be aware and working on it.
Free NAT KVM | Free NAT LXC
Stuff is back online, likely network issue, Node was still running.
Free NAT KVM | Free NAT LXC
Thanks for the update
Why?
Regarding our Node in Eygelshoven.
I suggest you take a backup, if your data is important.
Context, a datacenter (GLOBE datacenters), recently has been raided by the police and has been deconsecrated.
The Owners of this Datacenter, own also Skylink, in Eygelshoven.
I don't know as of Today, what will happen tomorrow.
Maybe this is getting resolved one way or another, but things don't look good as of now.
Sadly, I don't have any spare capacity as of right now, I cannot migrate anyone currently.
As precaution, take a backup.
Free NAT KVM | Free NAT LXC
IPv6 isn't working in CDA Idaho.
We accept Karma donations for the last flan. 🍮 affbrr
Yes I am aware, I send them a Ticket on Wednesday, however my Ticket vanished due to a database issue.
I noticed this on Thursday, I wrote them again, still waiting for a fix, no response yet since 3 days+
Free NAT KVM | Free NAT LXC
Monitoring confirms the prefix is online again.
However, they are still working on it.
"We are investigating an issue with our new upstream provider re: some of our IPv6 prefixes.
Should have this fixed in the next 24hrs."
Free NAT KVM | Free NAT LXC
I was suddenly transported back to my childhood wondering if I'm "tall enough" for the ride or if I have to wait a couple months to get on it. I guess I'll wait a couple months... hahaha
It was done to reduce the number of abusers who, once banned, just creates a new account to get access again. It does cause problems for new members of the forum, but it is a necessary evil to ensure the service is not abused.
@Neoon IPv6 stopped working for NL2, any known issue?
No, however yea IPv6 is down.
From the looks of it, the routes are gone.
Free NAT KVM | Free NAT LXC