NanoKVM | Free NAT KVM | Multiple Locations

1246789

Comments

  • Awmc233Awmc233

    226f30f4e3418c9a0f8b0df18c4f73384dad2cbd this is my token
    i want use it to build my webside

  • pikachupikachu

    @Awmc233 said:
    226f30f4e3418c9a0f8b0df18c4f73384dad2cbd this is my token
    i want use it to build my webside

    Reading is an essential skill.

  • spiritlhlspiritlhl

    @Awmc233 said:
    226f30f4e3418c9a0f8b0df18c4f73384dad2cbd this is my token
    i want use it to build my webside

    Your conditions do not meet the application requirements, please check the rules on the first page.

    My virtualized amusement park: https://github.com/oneclickvirt

  • NeoonNeoon OG

    As of right now, I still don't have more information on the Outage.
    The Person that does sponsor this node, went MIA, so I can't do anything right now.

    Free NAT KVM | Free NAT LXC

  • GanonkGanonk

    DE already online

  • bmchouming6973bmchouming6973

    9ff98e6e4c43ed26b25dc15c634d5c4a4d1c42f7 is my token
    I want use it to run my investment tool

  • spiritlhlspiritlhl
    edited April 2022

    @bmchouming6973 said:

    You do not meet the requirements, please check the rules on the first page.
    Even if I meet the requirements, I haven't received a reply recently. . .
    I have waited more than a week and a half and my legit request has not been responded to.

    My virtualized amusement park: https://github.com/oneclickvirt

  • NeoonNeoon OG

    Due to NanoKVM DE, I won't accept any new Requests for now.
    We likely have to migrate everyone off DE, that wants to keep the Service in the next weeks.

    Free NAT KVM | Free NAT LXC

  • ehabehab

    @Neoon said:
    Due to NanoKVM DE, I won't accept any new Requests for now.
    We likely have to migrate everyone off DE, that wants to keep the Service in the next weeks.

    every time i ssh i get in is this for 85.10.2xx.1xx ?

  • NeoonNeoon OG

    @ehab said:

    @Neoon said:
    Due to NanoKVM DE, I won't accept any new Requests for now.
    We likely have to migrate everyone off DE, that wants to keep the Service in the next weeks.

    every time i ssh i get in is this for 85.10.2xx.1xx ?

    The Panel tells you which Location, I don't know the IP out of my head.

    Free NAT KVM | Free NAT LXC

  • ehabehab

    @Neoon said:
    The Panel tells you which Location, I don't know the IP out of my head.

    yep, its ( Node - de )

    if the server down for maintenance then i can wait. If it will be deleted then what locations are possibly free?

  • GanonkGanonk

    what happen with DE node , Sir?

  • spiritlhlspiritlhl
    edited April 2022

    Well, looking forward to good news about the reopening of the registration application service in the future.

    My virtualized amusement park: https://github.com/oneclickvirt

  • NeoonNeoon OG

    @Ganonk said:
    what happen with DE node , Sir?

    The person that sponsors the Node, likely cannot continue to sponsor this machine.
    Hence, we likely have to shut it down, except we would get 60€ ish monthly funding, to keep it running.

    Its not 100% certain as of right now, however, its likely, so I rather let people know and let them make their choices if they wish.
    Regarding Stock, what is available according to the Website, we might get one slot there and there, later, maybe, at locations that are currently out of stock.

    Free NAT KVM | Free NAT LXC

  • MasonMason OG

    @Neoon said:
    Due to NanoKVM DE, I won't accept any new Requests for now.
    We likely have to migrate everyone off DE, that wants to keep the Service in the next weeks.

    Appreciate the good run! I think I signed on right when you opened the DE node years ago. Lost my panel login stuff shortly after initially setting it up, but has been so solid that I've never even needed access to the control panel. Thanks again, @Neoon!

    yabs daddy

  • GanonkGanonk

    @Neoon said:

    @Ganonk said:
    what happen with DE node , Sir?

    The person that sponsors the Node, likely cannot continue to sponsor this machine.
    Hence, we likely have to shut it down, except we would get 60€ ish monthly funding, to keep it running.

    Its not 100% certain as of right now, however, its likely, so I rather let people know and let them make their choices if they wish.
    Regarding Stock, what is available according to the Website, we might get one slot there and there, later, maybe, at locations that are currently out of stock.

    ticket sent :#

  • jmgcaguiclajmgcaguicla

    Just noticed the panel got updated (haven't logged in for months), looks pretty clean.

  • NeoonNeoon OG

    As Reminder, if you want your VM migrated, please drop me a PM.

    Free NAT KVM | Free NAT LXC

  • GanonkGanonk

    @Neoon said:
    As Reminder, if you want your VM migrated, please drop me a PM.

    PM sent.

  • yoshimitsu737yoshimitsu737

    Hello!
    Token: ff799b82d3a02ff0777990f065b59b855f49b996

  • spiritlhlspiritlhl

    @yoshimitsu737 said:
    Hello!
    Token: ff799b82d3a02ff0777990f065b59b855f49b996

    Applications are no longer being accepted recently, and even the backlog of applications has not had time to respond. Finally, you are not eligible to apply.

    My virtualized amusement park: https://github.com/oneclickvirt

  • GanonkGanonk

    "Boot order" still error after click save and refresh. no error message. only can not to change boot order.

  • alvinalvin

    Is the DE node down?

  • GanonkGanonk

    @alvin said:
    Is the DE node down?

    https://lowendspirit.com/discussion/comment/84610/#Comment_84610

  • NeoonNeoon OG

    @alvin said:
    Is the DE node down?

    Well it was, the Person who Sponsors us a a big KVM on the i9 Node in Hetzner, said he likely won't be doing this anymore because reasons. However, as it seems, the Node has been renewed once more.

    I don't do any new deployments on DE anymore, since its feature is uncertain.
    If you wanna get migrated lemme know.

    Free NAT KVM | Free NAT LXC

  • ehabehab

    @Neoon said:

    how to request migration please?

  • NeoonNeoon OG

    @ehab said:

    @Neoon said:

    how to request migration please?

    Drop me a PM.

    Free NAT KVM | Free NAT LXC

  • NeoonNeoon OG

    Fremont will be upgraded to 32GB Memory on Monday at 11:00 CEST.
    Expected Downtime about 20 minutes.

    Free NAT KVM | Free NAT LXC

  • iandkiandk ProviderOG
    edited June 2022

    what are the requirements for a sponsored node?
    I have lots of spare resources on my private ax41 in Germany and no intention of canceling anytime soon.

    AMD EPYC / NVMe / 10GBPs KVM in Frankfurt - https://v6node.com
    Looking for an unbeatable AMD EPYC Baremetal Server in Frankfurt? Drop me a PM

  • GanonkGanonk

    @iandk said:
    what are the requirements for a sponsored node?
    I have lots of spare resources on my private ax41 in Germany and no intention of canceling anytime soon.

    drop email [email protected]

  • NeoonNeoon OG

    Fremont is still down, due to complications, the Node isn't booting.
    After chassis swap, with the old drives, one Drive was non longer reported and has been replaced.

    No ETA right now, they trying to get the Node back online, Raid 10 looks fine after drive replacement.

    Free NAT KVM | Free NAT LXC

  • NeoonNeoon OG

    Fremont is back Online, CPU and Memory Upgraded.
    Raid 10 still in sync, I/O performance will be a bit lower until synced up.

    Free NAT KVM | Free NAT LXC

  • BrueggusBrueggus OG

    @Neoon said:
    Fremont is back Online, CPU and Memory Upgraded.
    Raid 10 still in sync, I/O performance will be a bit lower until synced up.

    Could you check if the network config on the node broke somehow? DHCP and IPv6 autoconfig don't work for me.

    I can get IPv4 to work if I configure static addresses but for IPv6 I don't get beyond the gateway:

    mtr --report --report-wide 2001:470:20::2
Start: Mon Jun  6 16:07:35 2022
HOST: xxxxxx Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- gateway             0.0%    10    0.2   0.2   0.2   0.2   0.0
  2.|-- ???                100.0    10    0.0   0.0   0.0   0.0   0.0

    dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/

  • NeoonNeoon OG

    @Brueggus said:

    @Neoon said:
    Fremont is back Online, CPU and Memory Upgraded.
    Raid 10 still in sync, I/O performance will be a bit lower until synced up.

    Could you check if the network config on the node broke somehow? DHCP and IPv6 autoconfig don't work for me.

    I can get IPv4 to work if I configure static addresses but for IPv6 I don't get beyond the gateway:

    mtr --report --report-wide 2001:470:20::2
Start: Mon Jun  6 16:07:35 2022
HOST: xxxxxx Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- gateway             0.0%    10    0.2   0.2   0.2   0.2   0.0
  2.|-- ???                100.0    10    0.0   0.0   0.0   0.0   0.0

    Should be fixed.

    Free NAT KVM | Free NAT LXC

  • BrueggusBrueggus OG

    @Neoon said:

    @Brueggus said:

    @Neoon said:
    Fremont is back Online, CPU and Memory Upgraded.
    Raid 10 still in sync, I/O performance will be a bit lower until synced up.

    Could you check if the network config on the node broke somehow? DHCP and IPv6 autoconfig don't work for me.

    I can get IPv4 to work if I configure static addresses but for IPv6 I don't get beyond the gateway:

    mtr --report --report-wide 2001:470:20::2
Start: Mon Jun  6 16:07:35 2022
HOST: xxxxxx Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- gateway             0.0%    10    0.2   0.2   0.2   0.2   0.0
  2.|-- ???                100.0    10    0.0   0.0   0.0   0.0   0.0

    Should be fixed.

    Thanks for looking into this! Autoconf works now but still no cigar:

    # ping6 2620:fe::fe
PING 2620:fe::fe(2620:fe::fe) 56 data bytes
^C
--- 2620:fe::fe ping statistics ---
13 packets transmitted, 0 received, 100% packet loss, time 11999ms

    dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/

  • NeoonNeoon OG

    @Brueggus said:

    @Neoon said:

    @Brueggus said:

    @Neoon said:
    Fremont is back Online, CPU and Memory Upgraded.
    Raid 10 still in sync, I/O performance will be a bit lower until synced up.

    Could you check if the network config on the node broke somehow? DHCP and IPv6 autoconfig don't work for me.

    I can get IPv4 to work if I configure static addresses but for IPv6 I don't get beyond the gateway:

    mtr --report --report-wide 2001:470:20::2
Start: Mon Jun  6 16:07:35 2022
HOST: xxxxxx Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- gateway             0.0%    10    0.2   0.2   0.2   0.2   0.0
  2.|-- ???                100.0    10    0.0   0.0   0.0   0.0   0.0

    Should be fixed.

    Thanks for looking into this! Autoconf works now but still no cigar:

    # ping6 2620:fe::fe
PING 2620:fe::fe(2620:fe::fe) 56 data bytes
^C
--- 2620:fe::fe ping statistics ---
13 packets transmitted, 0 received, 100% packet loss, time 11999ms

    Fixed, sorry for the issues.

    Free NAT KVM | Free NAT LXC

  • BrueggusBrueggus OG

    @Neoon said:
    Fixed, sorry for the issues.

    No worries, thanks for maintaining this service for free!

    dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/

  • GanonkGanonk

    DE node has been renewed again :3

  • alvinalvin

    DE node reborn again? :o

  • NeoonNeoon OG
    edited June 2022

    @alvin said:
    DE node reborn again? :o

    No, likely the machine was suspended due to no payment, and this has been done yesterday. this happened several times.
    As said before, we don't do any new deployments, I will starting removing DE.

    Free NAT KVM | Free NAT LXC

  • NeoonNeoon OG

    Norway will be upgraded to 32GB Memory on Friday at 11:00 CEST.
    Expected Downtime about 5-10 minutes.

    Free NAT KVM | Free NAT LXC

  • NeoonNeoon OG

    The Panel is currently broken, no ETA, working on it.

    Free NAT KVM | Free NAT LXC

  • NeoonNeoon OG

    @Neoon said:
    The Panel is currently broken, no ETA, working on it.

    Fixed, had some encoding issues after upgrading the database server.
    If you still see your Server status as unknown, please lemme now and I take a look.

    Free NAT KVM | Free NAT LXC

  • ThomasPThomasP

    Hi my Norway issn't getting his ipv6 address anymore.
    also reboot doesnt fix it.

  • NeoonNeoon OG

    @ThomasP said:
    Hi my Norway issn't getting his ipv6 address anymore.
    also reboot doesnt fix it.

    We had a maintenance on NO, after the boot radvd did not came up properly, should be fixed.

    Free NAT KVM | Free NAT LXC

  • ThomasPThomasP

    @Neoon said:

    @ThomasP said:
    Hi my Norway issn't getting his ipv6 address anymore.
    also reboot doesnt fix it.

    We had a maintenance on NO, after the boot radvd did not came up properly, should be fixed.

    Yep working again thank you :)

  • NeoonNeoon OG

    NO and FM have been restocked, NL will follow later.
    As stuff got switched to cloud-init, the images have been updated too.

    Free NAT KVM | Free NAT LXC

  • szymonpszymonp

    @Neoon said:
    NO and FM have been restocked, NL will follow later.
    As stuff got switched to cloud-init, the images have been updated too.

    If I choose 2GB ram, it says that the memory configuration is invalid

  • GanonkGanonk

    @szymonp said:

    If I choose 2GB ram, it says that the memory configuration is invalid

    2 GB ram only DE node

  • NeoonNeoon OG

    @szymonp said:

    @Neoon said:
    NO and FM have been restocked, NL will follow later.
    As stuff got switched to cloud-init, the images have been updated too.

    If I choose 2GB ram, it says that the memory configuration is invalid

    Uh, we actually do input validation.
    Yea I changed the 2GB option, however I forgot to edit the actual validation.

    Will fix it.

    Free NAT KVM | Free NAT LXC

Sign In or Register to comment.