HostBrr | Large storage VPS starting at $2.2/TB! Powerful 7950XD VPS starting at only $4.49!

yoursunny

@Labze said:

@yoursunny said:

@ehab said:
@Labze any happy hour surprises?

Pants are draped over the 1Gbps port.

It's fighting for its life. Potential 90TB of VPS fighting to be filled. Drive performance is showing its worth though, barely affected even though its consistently reading/writing 120MB/s at the moment.

I have filled 364 GB of my 1000 GB capacity.
Not gonna fill the whole TB this week, or ever.

sunny@box9:~$ df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            438M     0  438M   0% /dev
tmpfs            93M  500K   93M   1% /run
/dev/vda1       8.0G  2.9G  5.2G  36% /
tmpfs           464M     0  464M   0% /dev/shm
tmpfs           5.0M     0  5.0M   0% /run/lock
/dev/vdb1      1000G  364G  636G  37% /data
tmpfs            93M     0   93M   0% /run/user/1000

During the upload, rclone achieved speeds around 3.7 MB/s for large files.
I was running rclone on EvolutionHost (OVH) France, reading from LevelOneServers Dallas and writing to HostBrr Falkenstein, using crypt backend on both sides but with different passwords.

@Labze said:
It is KVM, VirtFusion control panel.
Custom ISO can be added on request.

This is my first time using VirtFusion control panel.
It responds faster than Virtualizor.
Enabling and disabling VNC does not need a reboot.
IPv4 NAT port mapping is configurable.

IPv6 is very stable.
I have been accessing this server over IPv6 only, and didn't bother with the IPv4 port mapping.
I didn't test IPv6 NDP as it's not needed on a storage server.

Custom ISO requires opening a ticket.
Within an hour the requested image (I asked for netboot.xyz for maximum flexibility) appeared in my account.
Debian setup was noticeably slow when I performed the installation, likely due to network congestion.

Labze

@yoursunny said: During the upload, rclone achieved speeds around 3.7 MB/s for large files.

Ouch. The initial rush has died down, and hopefully going forward it should be much better

@yoursunny said: Debian setup was noticeably slow when I performed the installation, likely due to network congestion.

>

Most likely yes, I was performing some tests on a VM to help a client during the rush and I noticed rebuilding was slowed down significantly. Should also be better now.

Thanks for sharing your experience

yoursunny

I pressed "IPv6 subnet - assign address" button several times.
Now there are many addresses listed there, and no way to delete.
This is an eyesore.
Maybe VirtFusion should have a "delete address" button?

Mumbly

I also miss the option to create my own addresses (ie. ::l337:bab3, ::1111:2222:3333, etc instead of assigning
::a, ::b, ::c, ... ::10, ::11, ::12 etc... in order) from my subnet, but that's not crucial - it's just a bit unique cosmetic limitation

Labze

@yoursunny said:
I pressed "IPv6 subnet - assign address" button several times.
Now there are many addresses listed there, and no way to delete.
This is an eyesore.
Maybe VirtFusion should have a "delete address" button?

I think it has been brought up and will (hopefully) be added. I can delete them for you if you want, just put in a ticket with the addresses you want deleted.

@Mumbly said:
I also miss the option to create my own addresses (ie. ::l337:bab3, ::1111:2222:3333, etc instead of assigning
::a, ::b, ::c, ... ::10, ::11, ::12 etc... in order) from my subnet, but that's not crucial - it's just a bit unique cosmetic limitation

Would indeed be nice, I'll mention it as a suggestion to the VirtFusion team. I know they are working on some great upcoming features so I wouldn't get my hopes up for it being a priority anytime soon though.

yoursunny

@Mumbly said:
I also miss the option to create my own addresses (ie. ::l337:bab3, ::1111:2222:3333, etc instead of assigning
::a, ::b, ::c, ... ::10, ::11, ::12 etc... in order) from my subnet, but that's not crucial - it's just a bit unique cosmetic limitation

All of the addresses in the assigned /64 are usable: put it on the network interface and traffic will come.
The Assign Address button does nothing other than adding an example address to the VirtFusion panel.
Thus, you can ignore the button completely and use your preferred addresses.

Mumbly

Ah, yes, I haven't thought about that as @Labze added IPv6 rDNS support so quickly that format didn't matter so much to me anymore.

happy

Is there gonna be another 40% off? i missed the "Storage-1GBrr" one. Also "5950X-1GBrr IPv6 Only" looks really good but 3tb bw is not great

Labze

@happy said:
Is there gonna be another 40% off? i missed the "Storage-1GBrr" one. Also "5950X-1GBrr IPv6 Only" looks really good but 3tb bw is not great

Won't be another 40% off anytime soon. It was a introductury offer. BW is not capped right now, have a few who used over 200% their allowance. I'll only enforce BW limits if bandwidth becomes a issue for other users.
(but of course do not buy it solely on that premise)

VirtFusion

@yoursunny said:
I pressed "IPv6 subnet - assign address" button several times.
Now there are many addresses listed there, and no way to delete.
This is an eyesore.
Maybe VirtFusion should have a "delete address" button?

Correct, it’s still a tad limited on the v6 side of things. Like you say, the full allocation is usable as we filter by subnet only.

happy

can you please add more bw, many thanks. Also im having an issue connecting via ssh, seems like ssh is down.
invoice: 11374
Order no: 6483673d3f1db

Labze

@happy said:
can you please add more bw, many thanks. Also im having an issue connecting via ssh, seems like ssh is down.
invoice: 11374
Order no: 6483673d3f1db

I've added more bandwidth. Also, if you still experience issues please create a ticket with some details so I can look into it. It works on my end.

marquelin

Hello, is this still available?
invoice: 11544
order: 64a2ff34d2c7c
thanks!

Labze

@marquelin said:
Hello, is this still available?
invoice: 11544
order: 64a2ff34d2c7c
thanks!

Bandwidth doubled

yoshiki

I hope this is still available!
Order 64a37332b4f26
Invoice #11546

Fritz

Any restock?

Labze

@Fritz said:
Any restock?

What are you looking for?