@mikho said:
Offer still open to anyone willing to try.
If you lend me a VM with 1 GB of swap for a day, I can most likely make you an Alpine template.
Thing is, the template is built from that VM.
If there is swap, it will created for every VM that uses that template thereafter.
So, my question is; do you really need it?
Would it be possible to run it with only 128mb later on (no swap)? If the answer is no, then there is no point in wasting time.
As I wont give 1gb swap to everyone.
@mikho said:
Offer still open to anyone willing to try.
If you lend me a VM with 1 GB of swap for a day, I can most likely make you an Alpine template.
Thing is, the template is built from that VM.
If there is swap, it will created for every VM that uses that template thereafter.
So, my question is; do you really need it?
Would it be possible to run it with only 128mb later on (no swap)? If the answer is no, then there is no point in wasting time.
As I wont give 1gb swap to everyone.
Understood. It would be better to have 3 x 3 GB ploop devices than swap actually. They are only needed temporarily. That is, allocate them, I'll start with a CentOS template and convert it to Alpine, shut the container down, and then you can remove the 2 additional ploop devices and make a template. I guess that is feasible?
After conversion the resource requirement is low. This is on one of my KVM's (so it includes kernel).
# free -m
total used free shared buff/cache available
Mem: 988 61 878 0 48 831
Swap: 0 0 0
Can probably be done without the extra ploops if necessary, but would be easier to have some breathing room. Anyway, I'd either fly or fail quickly.
@mikho Just going though and setting up all of the NATs and find that the OVZ7 instances are not providing the option in Virtualizor to enable Fuse or NFS. It is available in Bulgaria (OVZ6).
@mikho said: Offer still open to anyone willing to try.
To me it says "Bundle Unavailable", I have tried the Europe bundle. I bought a NAT256 (IT-MIL) 2 days ago, but it has not yet provisioned. I would ask if it could be converted to the Europe bundle, adding the difference. But if already sold out i'll wait for the provision.
@flips, @mikho Completed upgrading to centOS 8 just now. Went totally smooth..... until I run uname -sr Linux 3.10.0-957.12.2.vz7.86.2
.... What ?? kernel didn't update. Wasted half hour trying to find the issue, then it hit my mind.. openVZ. I guess I am using KVM for too long.
Guys what to do now? How can I use updated kernel? Does it mean, mikho needs to upgrade the "shared kernel" too?
Did the bundle have a name?
Or you just call it > @PHP_Backend said:
@flips, @mikho Completed upgrading to centOS 8 just now. Went totally smooth..... until I run uname -sr Linux 3.10.0-957.12.2.vz7.86.2
.... What ?? kernel didn't update. Wasted half hour trying to find the issue, then it hit my mind.. openVZ. I guess I am using KVM for too long.
Guys what to do now? How can I use updated kernel? Does it mean, mikho needs to upgrade the "shared kernel" too?
@flips said: I know it's a shared kernel, but in Debian 10 uname reports 4.19
Hmm... I'm not seeing that.
Milan:
daniel@it01:~$ uname -a
Linux it01.d.sb 3.10.0-957.12.2.vz7.96.21 #1 SMP Thu Jun 27 15:10:55 MSK 2019 x86_64 GNU/Linux
France:
daniel@fr01:~$ uname -a
Linux fr01.d.sb 3.10.0-957.12.2.vz7.96.21 #1 SMP Thu Jun 27 15:10:55 MSK 2019 x86_64 GNU/Linux
Both are Debian 10.2.
In any case, the version number is just something compiled into the kernel. It can be overridden, but that's very confusing as it doesn't really have 4.x features. The joy of OpenVZ being separate patches on top of legacy kernels, rather than being built in to the kernel directly like LXC is - Providers can never upgrade to a newer kernel version unless OpenVZ port their custom patches across.
@Daniel said: @flips said: I know it's a shared kernel, but in Debian 10 uname reports 4.19
Hmm... I'm not seeing that.
On a UK node with Inception Hosting (@AnthonySmith) and a Finland node with Gullo's Hosting (@cam), VPSes running Debian 10: uname -r shows version 4.19.0.
Maybe some OpenVZ host setting or something is different.
@flips said: Maybe some OpenVZ host setting or something is different.
Hmmmm, quite possibly a different setting. AFAIK there's no 4.19 kernel for OpenVZ so the version number is a lie, which is dangerous (as the kernel may not actually support all the features of 4.19.0).
@mikho i bought nat vps and it said the ip is not recognize and cannot purchase. i also got 500 internal server error for the first time. and now it said fraud. i check the order and they have 2 order duplicate but it said cancelled cause fraud.
would you like to check it? i have open an ticket. but you might not seeing that
@mikho said:
If you are willing to strip it down to a minimal image, I can create a template file from it and save it for everyone to use.
Offer still open to anyone willing to try.
Can you lend me a VM temporarily for this purpose? I am bored here.
@yng68bld said:
Is the Vegas server down again? Been offline for the whole day.
I just sent out an update about that node. It 's gone, I'm not spending one more minute on that. Nothing but issues since it was moved from Los Angeles to Las Vegas.
The good news is that it will be replaced with a Los Angeles node if you like that location.
@Iroshan464 said:
Hi,
I added 4 servers to cart and I didn't get the 45% discount.
Is there a promocode?
Thanks
The auto discount only requires you to be logged in when placing the order. If you are not logged in, the discount won't be applied.
@all, sorry for the absence, I got sick in November and if you ignore the symptoms, apparently it only gets worse, not better. Who knew
I'm better now, still not "good" but I hope that without setbacks, I'll be back to full speed in a week or two.
“Technology is best when it brings people together.” – Matt Mullenweg
@mikho said: I got sick in November ... I'm better now, still not "good" but I hope that without setbacks, I'll be back to full speed in a week or two.
Get well soon and I hope the forced downtime actually rejuvenates you and you bounce back to much better than before.
@yng68bld said:
Is the Vegas server down again? Been offline for the whole day.
I just sent out an update about that node. It 's gone, I'm not spending one more minute on that. Nothing but issues since it was moved from Los Angeles to Las Vegas.
The good news is that it will be replaced with a Los Angeles node if you like that location.
Comments
Removing all not needed services, only run what is absolutly neccesary, bring down the memory usage, clean all caches.
Here is a link to get you started: https://talk.lowendspirit.com/discussion/292/what-do-you-want-to-see-in-a-minimal-template-openvz-7
“Technology is best when it brings people together.” – Matt Mullenweg
Thing is, the template is built from that VM.
If there is swap, it will created for every VM that uses that template thereafter.
So, my question is; do you really need it?
Would it be possible to run it with only 128mb later on (no swap)? If the answer is no, then there is no point in wasting time.
As I wont give 1gb swap to everyone.
@nullnothere
I can transfer the VM to @tetech if there will be progress.
“Technology is best when it brings people together.” – Matt Mullenweg
Understood. It would be better to have 3 x 3 GB ploop devices than swap actually. They are only needed temporarily. That is, allocate them, I'll start with a CentOS template and convert it to Alpine, shut the container down, and then you can remove the 2 additional ploop devices and make a template. I guess that is feasible?
After conversion the resource requirement is low. This is on one of my KVM's (so it includes kernel).
# free -m
total used free shared buff/cache available
Mem: 988 61 878 0 48 831
Swap: 0 0 0
Can probably be done without the extra ploops if necessary, but would be easier to have some breathing room. Anyway, I'd either fly or fail quickly.
@mikho Just going though and setting up all of the NATs and find that the OVZ7 instances are not providing the option in Virtualizor to enable Fuse or NFS. It is available in Bulgaria (OVZ6).
Get your FREE VPS if you develop Open Source software
To me it says "Bundle Unavailable", I have tried the Europe bundle. I bought a NAT256 (IT-MIL) 2 days ago, but it has not yet provisioned. I would ask if it could be converted to the Europe bundle, adding the difference. But if already sold out i'll wait for the provision.
@flips, @mikho Completed upgrading to centOS 8 just now. Went totally smooth..... until I run
uname -srLinux 3.10.0-957.12.2.vz7.86.2.... What ?? kernel didn't update. Wasted half hour trying to find the issue, then it hit my mind.. openVZ. I guess I am using KVM for too long.
Guys what to do now? How can I use updated kernel? Does it mean, mikho needs to upgrade the "shared kernel" too?
https://phpbackend.com/
Did the bundle have a name?
Or you just call it > @PHP_Backend said:
Openvz7 means 3.10 forever untill EOL.
Action and Reaction in history
ahh, case closed then.
https://phpbackend.com/
Interesting ... I know it's a shared kernel, but in Debian 10 uname reports 4.19, so it fakes it somehow ...
Has anyone who bought a NAT VPS in Romania managed to get IPv6 working in their VPS?
I'm wondering if it's just me or a general issue.
dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/
Hmm... I'm not seeing that.
Milan:
France:
Both are Debian 10.2.
In any case, the version number is just something compiled into the kernel. It can be overridden, but that's very confusing as it doesn't really have 4.x features. The joy of OpenVZ being separate patches on top of legacy kernels, rather than being built in to the kernel directly like LXC is - Providers can never upgrade to a newer kernel version unless OpenVZ port their custom patches across.
Daniel15 | https://d.sb/. List of all my VPSes: https://d.sb/servers
dnstools.ws - DNS lookups, pings, and traceroutes from 30 locations worldwide.
I'm seeing the same thing. Filed a ticket earlier today.
Daniel15 | https://d.sb/. List of all my VPSes: https://d.sb/servers
dnstools.ws - DNS lookups, pings, and traceroutes from 30 locations worldwide.
There was a typo in the ipv6
gateway. I changed it and tested from a couple of different assigned subnets.
Got another ticket in this morning that its not working from all containers.
Will have another look at it
“Technology is best when it brings people together.” – Matt Mullenweg
On a UK node with Inception Hosting (@AnthonySmith) and a Finland node with Gullo's Hosting (@cam), VPSes running Debian 10:
uname -rshows version4.19.0.Maybe some OpenVZ host setting or something is different.
Hmmmm, quite possibly a different setting. AFAIK there's no 4.19 kernel for OpenVZ so the version number is a lie, which is dangerous (as the kernel may not actually support all the features of 4.19.0).
Daniel15 | https://d.sb/. List of all my VPSes: https://d.sb/servers
dnstools.ws - DNS lookups, pings, and traceroutes from 30 locations worldwide.
https://forum.openvz.org/index.php?t=msg&th=13599&goto=53513&S=63e5c236079180755e01fc8be871ea56#msg_53513
“Technology is best when it brings people together.” – Matt Mullenweg
It’s just a config file on the host node, I could make it say kernel version 10.69.69-amitz if I wanted
https://inceptionhosting.com
Please do not use the PM system here for Inception Hosting support issues.
Do it!
dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/
@mikho i bought nat vps and it said the ip is not recognize and cannot purchase. i also got 500 internal server error for the first time. and now it said fraud. i check the order and they have 2 order duplicate but it said cancelled cause fraud.
would you like to check it? i have open an ticket. but you might not seeing that
Can you lend me a VM temporarily for this purpose? I am bored here.
https://phpbackend.com/
@mikho , if you have available 256MB EU please create invoice. Thank you.
Did you find a solution yet?
dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/
Hi,
I added 4 servers to cart and I didn't get the 45% discount.
Is there a promocode?
Thanks
Enjoy meditation without religion for one month.
Is the Vegas server down again? Been offline for the whole day.
I just sent out an update about that node. It 's gone, I'm not spending one more minute on that. Nothing but issues since it was moved from Los Angeles to Las Vegas.
The good news is that it will be replaced with a Los Angeles node if you like that location.
The auto discount only requires you to be logged in when placing the order. If you are not logged in, the discount won't be applied.
@all, sorry for the absence, I got sick in November and if you ignore the symptoms, apparently it only gets worse, not better. Who knew
I'm better now, still not "good" but I hope that without setbacks, I'll be back to full speed in a week or two.
“Technology is best when it brings people together.” – Matt Mullenweg
Good news to see. I would love LA. Actually I live in the LA area so ping will be much faster.
@mikho Hope you feel better soon! Definitely rest up and spend time getting better
Daniel15 | https://d.sb/. List of all my VPSes: https://d.sb/servers
dnstools.ws - DNS lookups, pings, and traceroutes from 30 locations worldwide.
Get well soon and I hope the forced downtime actually rejuvenates you and you bounce back to much better than before.
Could you please check ticket > @mikho said:
Good to know that LV will be replaced by LA.