Very nice offer, thank you Anthony!
I grabbed a FRA-SSD-KVM-2048 and everything looks fine so far. I installed Debian 10 and immediately upgraded to Debian 11 via dist-upgrade, but do you plan to have Debian 11 as an option available anytime soon?
Amitz, a very stable genius (it's true!) and Grand Rectumfier of the official LESLOS® (LES League of Shitposters).
Certified braindead since 1974 and still perfectly happy.
@Amitz said:
Very nice offer, thank you Anthony!
I grabbed a FRA-SSD-KVM-2048 and everything looks fine so far. I installed Debian 10 and immediately upgraded to Debian 11 via dist-upgrade, but do you plan to have Debian 11 as an option available anytime soon?
You can install Debian 11 from ISO. Simply click on "CD ROM" in SolusVM (2nd option in the menu where is also hostname, password, network etc.). All you need to do is setup IPv6 manually after the installation finished (note that you may need to increase your network size from /64).
@Amitz said:
Very nice offer, thank you Anthony!
I grabbed a FRA-SSD-KVM-2048 and everything looks fine so far. I installed Debian 10 and immediately upgraded to Debian 11 via dist-upgrade, but do you plan to have Debian 11 as an option available anytime soon?
You can install Debian 11 from ISO. Simply click on "CD ROM" in SolusVM (2nd option in the menu where is also hostname, password, network etc.). All you need to do is setup IPv6 manually after the installation finished (note that you may need to increase your network size from /64).
wait a minute, what do you mean by increasing the network size from /64?
I was also bit disappointed to see Debian 11 not present but Debian 10 isn't bad too. Its not a deal breaker! Really wish that Debian 11 were available as install option.
@xowxenxirix said:
I was also bit disappointed to see Debian 11 not present but Debian 10 isn't bad too. Its not a deal breaker! Really wish that Debian 11 were available as install option.
You would install Debian 10, then easily do upgrade to Debian 11 by command line. IMHO, I am always preferred by installing OS from iso if available.
@webcraft said:
You can install Debian 11 from ISO.
Yes, you are of course right and I know about the possibility. And I would probably prefer that if I'd plan to use the very instance for a longer time. But I often spin up a fresh install and it is much faster via a ready-made image than going through the ISO installation process.
Amitz, a very stable genius (it's true!) and Grand Rectumfier of the official LESLOS® (LES League of Shitposters).
Certified braindead since 1974 and still perfectly happy.
@webcraft said:
You can install Debian 11 from ISO.
Yes, you are of course right and I know about the possibility. And I would probably prefer that if I'd plan to use the very instance for a longer time. But I often spin up a fresh install and it is much faster via a ready-made image than going through the ISO installation process.
Amitz, a very stable genius (it's true!) and Grand Rectumfier of the official LESLOS® (LES League of Shitposters).
Certified braindead since 1974 and still perfectly happy.
It's great. I have been a fan of Debian from version 3.0; but when they moved to systemd, I used to be familiar with FreeBSD and Alpine Linux. Now I use all of three. Fortunately, InceptionHosting support all three
It's great. I have been a fan of Debian from version 3.0; but when they moved to systemd, I used to be familiar with FreeBSD and Alpine Linux. Now I use all of three. Fortunately, InceptionHosting support all three
I'm using a similar setup: Debian for most VPS since it causes less trouble with the hypervisor (like on Xen or certain SolusVM functionalities) and FreeBSD for dedis because it feels like there's less overhead and an overall better/faster and more stable performance.
It's great. I have been a fan of Debian from version 3.0; but when they moved to systemd, I used to be familiar with FreeBSD and Alpine Linux. Now I use all of three. Fortunately, InceptionHosting support all three
I'm using a similar setup: Debian for most VPS since it causes less trouble with the hypervisor (like on Xen or certain SolusVM functionalities) and FreeBSD for dedis because it feels like there's less overhead and an overall better/faster and more stable performance.
Let you try Alpine (iso of linux-lts available on SolusVM of @InceptionHosting ). After a fresh installation of about one or two minutes, you would change linux-lts kernel to linux-virt kernel (# apk add linux-virt && apk del linux-lts) (or demand to mount a new iso of 44MB virtual version to install), then see all system size of less 100MB storage (sys mode) with used memory of 30MB RAM.
Alpine Linux is really low-end-spirit, therefore.
i am a fan of alpine especially for Virtual kernel, however if you plan to use ISCSI or other tools that require kernel models then minimal debain is fine.
I'm curious why other options gone? @InceptionHosting
There were windows 2019, 2016 etc..
I'm not experienced with command lines or anything to install windows thru netboot, I would be glad to have windows installation media back, or at least mount iso..
I'm not experienced with command lines or anything to install windows thru netboot, I would be glad to have windows installation media back, or at least mount iso..
Resolved in a ticket, we had a clean up as there was a TON of used once or never used and out of date ISO images, people are always welcome to request a different one.
@webcraft said:
The IPv6 config in Frankfurt is still messy, isn't it?
100% resolved. if you still have issues on IPv6 please hit the reconfigure networking button in the VPS control panel or alternatively grab the new GW from the config in the subnet info within the panel.
Comments
You wont find storage servers here for a while I am afraid, not saying never, just no immediate plans.
https://inceptionhosting.com
Please do not use the PM system here for Inception Hosting support issues.
I'm surprised when to see low latency from Frankfurt to APAC. Recommended for APAC residents looking for Europe hosting.
Yes, i also get good down bandwidth from frankfurt compared to their other locations. That's why i wanted a storage vps in this location.
Clouvider know how to network!
https://inceptionhosting.com
Please do not use the PM system here for Inception Hosting support issues.
Very nice offer, thank you Anthony!
I grabbed a FRA-SSD-KVM-2048 and everything looks fine so far. I installed Debian 10 and immediately upgraded to Debian 11 via dist-upgrade, but do you plan to have Debian 11 as an option available anytime soon?
Amitz, a very stable genius (it's true!) and Grand Rectumfier of the official LESLOS® (LES League of Shitposters).
Certified braindead since 1974 and still perfectly happy.
You can install Debian 11 from ISO. Simply click on "CD ROM" in SolusVM (2nd option in the menu where is also hostname, password, network etc.). All you need to do is setup IPv6 manually after the installation finished (note that you may need to increase your network size from /64).
wait a minute, what do you mean by increasing the network size from /64?
I was also bit disappointed to see Debian 11 not present but Debian 10 isn't bad too. Its not a deal breaker! Really wish that Debian 11 were available as install option.
You would install Debian 10, then easily do upgrade to Debian 11 by command line. IMHO, I am always preferred by installing OS from iso if available.
Yes, you are of course right and I know about the possibility. And I would probably prefer that if I'd plan to use the very instance for a longer time. But I often spin up a fresh install and it is much faster via a ready-made image than going through the ISO installation process.
Amitz, a very stable genius (it's true!) and Grand Rectumfier of the official LESLOS® (LES League of Shitposters).
Certified braindead since 1974 and still perfectly happy.
Debian 11 template creation is in progress.
https://inceptionhosting.com
Please do not use the PM system here for Inception Hosting support issues.
Great, thank you Anthony!
Amitz, a very stable genius (it's true!) and Grand Rectumfier of the official LESLOS® (LES League of Shitposters).
Certified braindead since 1974 and still perfectly happy.
The template is live.
https://inceptionhosting.com
Please do not use the PM system here for Inception Hosting support issues.
It's great. I have been a fan of Debian from version 3.0; but when they moved to systemd, I used to be familiar with FreeBSD and Alpine Linux. Now I use all of three. Fortunately, InceptionHosting support all three
I'm using a similar setup: Debian for most VPS since it causes less trouble with the hypervisor (like on Xen or certain SolusVM functionalities) and FreeBSD for dedis because it feels like there's less overhead and an overall better/faster and more stable performance.
Let you try Alpine (iso of linux-lts available on SolusVM of @InceptionHosting ). After a fresh installation of about one or two minutes, you would change linux-lts kernel to linux-virt kernel (#
apk add linux-virt && apk del linux-lts) (or demand to mount a new iso of 44MB virtual version to install), then see all system size of less 100MB storage (sys mode) with used memory of 30MB RAM.Alpine Linux is really low-end-spirit, therefore.
i am a fan of alpine especially for Virtual kernel, however if you plan to use ISCSI or other tools that require kernel models then minimal debain is fine.
I'm curious why other options gone? @InceptionHosting
There were windows 2019, 2016 etc..
I'm not experienced with command lines or anything to install windows thru netboot, I would be glad to have windows installation media back, or at least mount iso..
Resolved in a ticket, we had a clean up as there was a TON of used once or never used and out of date ISO images, people are always welcome to request a different one.
https://inceptionhosting.com
Please do not use the PM system here for Inception Hosting support issues.
This offer is officially over now, thanks to everyone, some great sales numbers.
https://inceptionhosting.com
Please do not use the PM system here for Inception Hosting support issues.
heya, network in FRA seems troubled... is it just me? VNC works fine, nothing mentioned in network status.
yeah of course I opened a ticket, just wanted to check in, if this related to the network/subnet or only mine ;-)
all back to working now, support could find the issue quickly and resolve the problem. awesome, reliable, even on sunday night - thanks Dom!
The IPv6 config in Frankfurt is still messy, isn't it?
works for my small box right now, but to be fair I don't monitor that part close enough...
100% resolved. if you still have issues on IPv6 please hit the reconfigure networking button in the VPS control panel or alternatively grab the new GW from the config in the subnet info within the panel.
https://inceptionhosting.com
Please do not use the PM system here for Inception Hosting support issues.