Transfer OVH KS-STOR 16GB, 1x512GB NVMe, 4x4TB HDD
quicksilver03
ProviderOG
This a the server I got earlier this month from another LES member.
Unfortunately, one disk started failing a couple of days after I took over the server, and it took 2 replacements plus a bit of convincing OVH to check the SATA cabling to achieve a working setup. This disk is the 4th one in the SMART reports below.
I'm letting this server go because I already moved my data elsewhere while OVH was dragging their feet, and thus I have no longer any use for it. This server renews on February 20th 2027 for 1 year, OVH will charge 273.49 EUR excluding VAT.
You will need an account on OVH EU to take over this server, I will perform the transfer via OVH change of contact (admin, technical, billing). Payment via PayPal F&F only, no crypto.
I'm asking for 90 EUR and you pay the PayPal transfer fees. If the server is not transferred away by October 31st I'll just cancel it.
Contact me via PM, given the disk situation make sure to include in your message the phrase "I have read the smartctl reports of all disks".
YABS report:
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
# Yet-Another-Bench-Script #
# v2026-10-07 #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
Mon Oct 26 07:15:00 UTC 2026
Basic System Information:
---------------------------------
Uptime : 0 days, 0 hours, 6 minutes
Processor : Intel(R) Xeon(R) CPU D-1521 @ 2.40GHz
CPU cores : 8 @ 950.816 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 15.5 GiB
Swap : 512.0 MiB
Disk : 467.9 GiB
Distro : Debian GNU/Linux 13 (trixie)
Kernel : 6.12.113+deb13-amd64
VM Type : NONE
IPv4/IPv6 : ✔ Online / ✔ Online
IPv6 Network Information:
---------------------------------
ISP : OVH SAS
ASN : AS16276 OVH SAS
Host : OVH Ltd
Location : Stanmore, England (ENG)
Country : United Kingdom
fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/nvme0n1p3):
---------------------------------
Block Size | 4k (IOPS) | 64k (IOPS)
------ | --- ---- | ---- ----
Read | 647.73 MB/s (158.1k) | 1.46 GB/s (22.4k)
Write | 649.44 MB/s (158.5k) | 1.47 GB/s (22.5k)
Total | 1.29 GB/s (316.6k) | 2.94 GB/s (44.9k)
| |
Block Size | 512k (IOPS) | 1m (IOPS)
------ | --- ---- | ---- ----
Read | 1.94 GB/s (3.7k) | 1.97 GB/s (1.8k)
Write | 2.04 GB/s (3.9k) | 2.10 GB/s (2.0k)
Total | 3.98 GB/s (7.6k) | 4.07 GB/s (3.8k)
iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed | Ping
----- | ----- | ---- | ---- | ----
Clouvider | London, UK (10G) | 485 Mbits/sec | 6.80 Gbits/sec | 1.22 ms
Eranium | Amsterdam, NL (100G) | 484 Mbits/sec | 9.33 Gbits/sec | 10.8 ms
Uztelecom | Tashkent, UZ (10G) | 448 Mbits/sec | 2.33 Gbits/sec | 102 ms
Leaseweb | Singapore, SG (10G) | 399 Mbits/sec | 904 Mbits/sec | 241 ms
Clouvider | Los Angeles, CA, US (10G) | 317 Mbits/sec | 1.30 Gbits/sec | 136 ms
Leaseweb | NYC, NY, US (10G) | 465 Mbits/sec | 3.54 Gbits/sec | 70.5 ms
Edgoo | Sao Paulo, BR (1G) | busy | busy | 190 ms
iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed | Ping
----- | ----- | ---- | ---- | ----
Clouvider | London, UK (10G) | 479 Mbits/sec | 7.16 Gbits/sec | 1.32 ms
Eranium | Amsterdam, NL (100G) | 477 Mbits/sec | 9.20 Gbits/sec | 10.7 ms
Uztelecom | Tashkent, UZ (10G) | 440 Mbits/sec | 2.34 Gbits/sec | 101 ms
Leaseweb | Singapore, SG (10G) | 416 Mbits/sec | 1.34 Gbits/sec | 173 ms
Clouvider | Los Angeles, CA, US (10G) | 251 Mbits/sec | 1.52 Gbits/sec | 134 ms
Leaseweb | NYC, NY, US (10G) | 440 Mbits/sec | 3.50 Gbits/sec | 70.5 ms
Edgoo | Sao Paulo, BR (1G) | busy | busy | 232 ms
Geekbench 6 Benchmark Test:
---------------------------------
Test | Value
|
Single Core | 953
Multi Core | 3430
Full Test | https://browser.geekbench.com/v6/cpu/19391236
YABS completed in 13 min 39 sec
SMART reports:
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.12.95-mod-std] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: SAMSUNG MZVL2512HCJQ-00B07
Serial Number: S63CNE0RB07047
Firmware Version: GXA7802Q
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 512,110,190,592 [512 GB]
Unallocated NVM Capacity: 0
Controller ID: 6
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 512,110,190,592 [512 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 bb11001b88
Local Time is: Sun Oct 25 10:06:42 2026 UTC
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp
Log Page Attributes (0x0e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 128 Pages
Warning Comp. Temp. Threshold: 81 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 8.37W - - 0 0 0 0 0 0
1 + 8.37W - - 1 1 1 1 0 200
2 + 8.37W - - 2 2 2 2 0 200
3 - 0.0500W - - 3 3 3 3 2000 1200
4 - 0.0050W - - 4 4 4 4 500 9500
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 41 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 1%
Data Units Read: 11,152,316 [5.70 TB]
Data Units Written: 16,756,165 [8.57 TB]
Host Read Commands: 140,896,688
Host Write Commands: 211,490,315
Controller Busy Time: 544
Power Cycles: 39
Power On Hours: 393
Unsafe Shutdowns: 35
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 41 Celsius
Temperature Sensor 2: 51 Celsius
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.12.95-mod-std] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HGST HUS726T4TALA6L1
Serial Number: V1HMRA2H
LU WWN Device Id: 5 000cca 0bcd70e5c
Firmware Version: VLGNX984
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Oct 25 10:07:04 2026 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 87) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 527) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 128 128 054 Pre-fail Offline - 108
3 Spin_Up_Time 0x0007 189 189 024 Pre-fail Always - 232 (Average 215)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 68
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 43119
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 68
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2074
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 2074
194 Temperature_Celsius 0x0002 150 150 000 Old_age Always - 40 (Min/Max 18/66)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 43063 -
# 2 Short offline Completed without error 00% 43039 -
# 3 Short offline Completed without error 00% 43015 -
# 4 Short offline Completed without error 00% 42991 -
# 5 Short offline Completed without error 00% 42967 -
# 6 Extended offline Completed without error 00% 42953 -
# 7 Short offline Completed without error 00% 42943 -
# 8 Short offline Completed without error 00% 42919 -
# 9 Short offline Completed without error 00% 42896 -
#10 Short offline Completed without error 00% 42871 -
#11 Short offline Completed without error 00% 42847 -
#12 Short offline Completed without error 00% 42823 -
#13 Short offline Completed without error 00% 42799 -
#14 Extended offline Interrupted (host reset) 50% 42779 -
#15 Short offline Completed without error 00% 42775 -
#16 Extended offline Completed without error 00% 41245 -
#17 Short offline Completed without error 00% 41198 -
#18 Short offline Completed without error 00% 41190 -
#19 Short offline Completed without error 00% 37192 -
#20 Short offline Completed without error 00% 37179 -
#21 Short offline Completed without error 00% 37178 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.12.95-mod-std] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HGST HUS726T4TALA6L1
Serial Number: V1JULYAH
LU WWN Device Id: 5 000cca 0bce7d368
Firmware Version: VLGNX984
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Oct 25 10:07:23 2026 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 87) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 506) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 129 129 054 Pre-fail Offline - 104
3 Spin_Up_Time 0x0007 174 174 024 Pre-fail Always - 264 (Average 222)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 72
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 10143
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 72
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 847
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 847
194 Temperature_Celsius 0x0002 150 150 000 Old_age Always - 40 (Min/Max 24/51)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 10086 -
# 2 Short offline Completed without error 00% 10062 -
# 3 Short offline Completed without error 00% 10038 -
# 4 Short offline Completed without error 00% 10014 -
# 5 Short offline Completed without error 00% 9990 -
# 6 Extended offline Completed without error 00% 9976 -
# 7 Short offline Completed without error 00% 9966 -
# 8 Short offline Completed without error 00% 9942 -
# 9 Short offline Completed without error 00% 9919 -
#10 Short offline Completed without error 00% 9894 -
#11 Short offline Completed without error 00% 9870 -
#12 Short offline Completed without error 00% 9846 -
#13 Short offline Completed without error 00% 9822 -
#14 Extended offline Interrupted (host reset) 50% 9803 -
#15 Short offline Completed without error 00% 9798 -
#16 Extended offline Completed without error 00% 8268 -
#17 Short offline Completed without error 00% 8221 -
#18 Short offline Completed without error 00% 8213 -
#19 Short offline Completed without error 00% 4215 -
#20 Short offline Completed without error 00% 4202 -
#21 Short offline Completed without error 00% 4202 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.12.95-mod-std] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HGST HUS726T4TALA6L1
Serial Number: V1HDD99H
LU WWN Device Id: 5 000cca 0bcd3ba21
Firmware Version: VLGNX984
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Oct 25 10:07:26 2026 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 87) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 552) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 128 128 054 Pre-fail Offline - 108
3 Spin_Up_Time 0x0007 177 177 024 Pre-fail Always - 247 (Average 231)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 75
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 10143
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 75
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 855
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 855
194 Temperature_Celsius 0x0002 162 162 000 Old_age Always - 37 (Min/Max 25/52)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 10086 -
# 2 Short offline Completed without error 00% 10062 -
# 3 Short offline Completed without error 00% 10038 -
# 4 Short offline Completed without error 00% 10014 -
# 5 Short offline Completed without error 00% 9990 -
# 6 Extended offline Completed without error 00% 9977 -
# 7 Short offline Completed without error 00% 9966 -
# 8 Short offline Completed without error 00% 9942 -
# 9 Short offline Completed without error 00% 9920 -
#10 Short offline Completed without error 00% 9894 -
#11 Short offline Completed without error 00% 9870 -
#12 Short offline Completed without error 00% 9846 -
#13 Short offline Completed without error 00% 9822 -
#14 Extended offline Interrupted (host reset) 50% 9803 -
#15 Short offline Completed without error 00% 9798 -
#16 Extended offline Completed without error 00% 8269 -
#17 Short offline Completed without error 00% 8221 -
#18 Short offline Completed without error 00% 8213 -
#19 Short offline Completed without error 00% 4215 -
#20 Short offline Completed without error 00% 4202 -
#21 Short offline Completed without error 00% 4202 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.12.95-mod-std] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Ultrastar 7K4000
Device Model: HGST HUS724040ALA640
Serial Number: PN2334PCK2L0XB
LU WWN Device Id: 5 000cca 24ceb72ef
Firmware Version: MFAOABY0
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Oct 25 10:07:28 2026 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 24) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 564) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 138 138 054 Pre-fail Offline - 75
3 Spin_Up_Time 0x0007 185 185 024 Pre-fail Always - 429 (Average 405)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 55
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 142 142 020 Pre-fail Offline - 25
9 Power_On_Hours 0x0012 090 090 000 Old_age Always - 74076
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 55
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1231
193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1231
194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 17/65)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 33
SMART Error Log Version: 1
ATA Error Count: 33 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 33 occurred at disk power-on lifetime: 8522 hours (355 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 a7 b2 c0 01 Error: ICRC, ABRT at LBA = 0x01c0b2a7 = 29405863
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 c8 a0 b2 c0 40 00 00:26:53.956 READ FPDMA QUEUED
60 08 80 f8 ba c0 40 00 00:26:53.919 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:26:53.848 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:26:53.848 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:26:53.846 IDENTIFY DEVICE
Error 32 occurred at disk power-on lifetime: 8522 hours (355 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 00:26:48.311 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:26:48.311 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 00:26:48.311 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:26:48.311 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:26:48.309 IDENTIFY DEVICE
Error 31 occurred at disk power-on lifetime: 8522 hours (355 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 ff ba c0 01 Error: ICRC, ABRT at LBA = 0x01c0baff = 29407999
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 88 f8 ba c0 40 00 00:26:47.868 READ FPDMA QUEUED
60 08 80 d0 ba c0 40 00 00:26:47.860 READ FPDMA QUEUED
60 08 78 e0 ba c0 40 00 00:26:47.852 READ FPDMA QUEUED
60 08 70 20 bb c0 40 00 00:26:47.844 READ FPDMA QUEUED
60 08 68 d0 bb c0 40 00 00:26:47.836 READ FPDMA QUEUED
Error 30 occurred at disk power-on lifetime: 8522 hours (355 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 a7 be c0 01 Error: ICRC, ABRT at LBA = 0x01c0bea7 = 29408935
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 c0 a0 be c0 40 00 00:26:47.168 READ FPDMA QUEUED
60 08 b8 00 be c0 40 00 00:26:47.150 READ FPDMA QUEUED
b0 d5 01 e1 4f c2 00 00 00:26:46.367 SMART READ LOG
b0 d6 01 e0 4f c2 00 00 00:26:46.367 SMART WRITE LOG
b0 d5 01 e0 4f c2 00 00 00:26:46.366 SMART READ LOG
Error 29 occurred at disk power-on lifetime: 8522 hours (355 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 99 37 bb c0 01 Error: ICRC, ABRT at LBA = 0x01c0bb37 = 29408055
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 28 28 d8 bb c0 40 00 00:03:36.717 READ FPDMA QUEUED
60 a8 20 28 bb c0 40 00 00:03:36.717 READ FPDMA QUEUED
60 20 18 00 bb c0 40 00 00:03:36.717 READ FPDMA QUEUED
60 10 10 e8 ba c0 40 00 00:03:36.717 READ FPDMA QUEUED
60 08 08 d8 ba c0 40 00 00:03:36.717 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8339 -
# 2 Short offline Completed without error 00% 8316 -
# 3 Short offline Completed without error 00% 8291 -
# 4 Short offline Completed without error 00% 8267 -
# 5 Short offline Completed without error 00% 8243 -
# 6 Extended offline Interrupted (host reset) 90% 8232 -
# 7 Short offline Completed without error 00% 8223 -
# 8 Short offline Completed without error 00% 8207 -
# 9 Short offline Completed without error 00% 8207 -
#10 Short offline Completed without error 00% 8207 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.