server-factory.com | New NL Location | Double Storage | Free BGP | 50% OFF for yearly payment

mxmlamxmla
edited November 2023 in Offers

Hi there!

Here we go, our new Eygelshoven, The Netherlands location is live!

To celebrate this event all Plans are 50 % off (recurring) for yearly payment!

Storage for all Plans is doubled compared to our older Plans!

BGP Sessions are available free of charge for any Plan!
Requirements: ASN, Subnet, RPKI with ROA
Open a Ticket after your order and provide your ASN and Subnets.
IPv6 ONLY VPS can only announce IPv6 Subnets.

The IPv6 /64 Subnet is routed towards the ::1 IPv6 Address of the Subnet.

Plans are hosted on:

AMD EPYC™ 7702P BASE CLOCK 2.0 GHZ / BOOST CLOCK UP TO 3.35 GHZ
512 GB DDR4 3200 MHZ ECC RAM from Samsung
8x Samsung PM9A3 DATA CENTER NVME PCIe 4.0 SSD in ZFS RAID 10
2x 10 Gbit Uplink (LACP) (1 Gbit UPLINK per VPS)

The following Prices are exclusive VAT. VAT will be added during order if you are from the EU, otherwise no VAT will be added.

The Netherlands AMD EPYC™ IPv6 ONLY VPS

NL-AMD EPYC™ XXS IPv6 ONLY VPS 24 HOUR TRIAL: 1 (25 % limit) Core / 2 GiB RAM / 50 GiB STORAGE / 1 Gbit UPLINK / 100 GiB TRAFFIC FOR 24 HOURS / /64 IPv6 Subnet
FREE for 24 hours (ORDER HERE!)

NL-AMD EPYC™ XXS IPv6 ONLY VPS: 1 Core / 2 GiB RAM / 50 GiB STORAGE / 1 Gbit UPLINK / 4 TiB TRAFFIC PER MONTH / /64 IPv6 Subnet
2 € per month (ORDER HERE!) / 12 € per year (ORDER HERE!)

NL-AMD EPYC™ XS IPv6 ONLY VPS: 1 Core / 4 GiB RAM / 100 GiB STORAGE / 1 Gbit UPLINK / 8 TiB TRAFFIC PER MONTH / /64 IPv6 Subnet
4 € per month (ORDER HERE!) / 24 € per year (ORDER HERE!)

NL-AMD EPYC™ S IPv6 ONLY VPS: 2 Core / 8 GiB RAM / 200 GiB STORAGE / 1 Gbit UPLINK / 16 TiB TRAFFIC PER MONTH / /64 IPv6 Subnet
48 € per year (ORDER HERE!)

In need of Plans with higher specs? Check out our Website!

The Netherlands AMD EPYC™ VPS

NL-AMD EPYC™ XXS VPS: 1 Core / 2 GiB RAM / 50 GiB STORAGE / 1 Gbit UPLINK / 4 TiB TRAFFIC PER MONTH / 1 IPv4 Address / /64 IPv6 Subnet
3 € per month (ORDER HERE!) / 18 € per year (ORDER HERE!)

NL-AMD EPYC™ XS VPS: 1 Core / 4 GiB RAM / 100 GiB STORAGE / 1 Gbit UPLINK / 8 TiB TRAFFIC PER MONTH / 1 IPv4 Address / /64 IPv6 Subnet
5 € per month (ORDER HERE!) / 30 € per year (ORDER HERE!)

NL-AMD EPYC™ S VPS: 2 Core / 8 GiB RAM / 200 GiB STORAGE / 1 Gbit UPLINK / 16 TiB TRAFFIC PER MONTH / 1 IPv4 Address / /64 IPv6 Subnet
54 € per year (ORDER HERE!)

In need of Plans with higher specs? Check out our Website!

General Information

  • No refunds!

  • Pay with PayPal | Alipay | Bitcoin (+ other Cryptocurrencies) | Credit Card (Visa | Mastercard | American Express | UnionPay) | SEPA Bank Transfer

  • Debian 11 and 12 / Ubuntu Server 20.04 and 22.04 / AlmaLinux 8 and 9 / Rocky Linux 8 and 9 / MikroTik RouterOS 7 / Windows Server 2022 Standard Trial (BYOL)

  • Looking Glass (IPv4: 31.41.249.10 - IPv6: 2a07:e042:1:10::1) => lg.nl.server-factory.com

  • Owned Hardware colocated in SkyLink Data Center, Eygelshoven, The Netherlands

  • RIPE Member => Link

  • Own IPv6 Subnet => Link

  • Own IPv4 Subnets => Link 1

  • Privacy Policy and Terms of Service and Site Notice

Thanks!

Kind regards,

Max from server-factory.com

server-factory.com

«1

Comments

  • ehabehab

    oh dear

    shouting loudly
    LAPUA @lapua

  • yoursunnyyoursunny OG

    @mxmla said:
    AMD EPYC™ 7702P BASE CLOCK 2.0 GHZ / BOOST CLOCK UP TO 3.35 GHZ
    512 GB DDR4 3200 MHZ ECC RAM from Samsung

    EPYC 7702P has 128 threads.
    If each vCPU is a thread, fair use is 25% vCPU per 1GB RAM.
    If I buy 2 vCPU 8GB plan, I can use 200% persistently, so it's actually a VDS?

    We accept Karma donations for the last flan. 🍮 affbrr

  • nick_nick_

    I like how Max always writes the entire node specs. Every provider should do it if possible.

  • ehabehab

    @mxmla are cores dedicated ?

  • mxmlamxmla

    @yoursunny said:
    EPYC 7702P has 128 threads.
    If each vCPU is a thread, fair use is 25% vCPU per 1GB RAM.
    If I buy 2 vCPU 8GB plan, I can use 200% persistently, so it's actually a VDS?

    @ehab said:
    @mxmla are cores dedicated ?

    As always: 50 % continues usage is allowed :) 2 Threads for 8 GiB RAM are assigned, 1 Core is dedicated to the VPS.

    @nick_ said:
    I like how Max always writes the entire node specs. Every provider should do it if possible.

    Thanks for your feedback! :)

    server-factory.com

  • lapualapua

    @ehab said:
    oh dear

    shouting loudly
    LAPUA @lapua

    .338 LAPUA Magnum please!

  • coldcold OG

    @mxmla do you allow irc scripts?

  • mxmlamxmla

    @cold said:
    @mxmla do you allow irc scripts?

    Sure! :)

    server-factory.com

  • mxmlamxmla

    I forgot to include this in the offer:

    The IPv6 /64 Subnet is routed towards the ::1 IPv6 Address of the Subnet.

    server-factory.com

  • JabJab TOP Member 2027

    Double-Double storage on Invoice ID?! :trollface:

    Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.

  • mxmlamxmla

    @Jab said:
    Double-Double storage on Invoice ID?! :trollface:

    Expected exactly that :D Not possible, I am sorry :)

    server-factory.com

  • DarkMagikDarkMagik
    edited November 2023

    YABS for the 16GB version, need to stop frequenting this forum. :'( The deals are too strong for my weak will

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

# Yet-Another-Bench-Script

# v2023-09-06

# https://github.com/masonr/yet-another-bench-script

# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

Mon Nov 13 06:43:03 PM CET 2023

## Basic System Information:

Uptime     : 0 days, 1 hours, 5 minutes
Processor  : AMD EPYC 7702P 64-Core Processor
CPU cores  : 4 @ 1999.999 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM        : 15.6 GiB
Swap       : 0.0 KiB
Disk       : 393.7 GiB
Distro     : Ubuntu 22.04.3 LTS
Kernel     : 5.15.0-88-generic
VM Type    : KVM
IPv4/IPv6  : ✔ Online / ✔ Online

## IPv6 Network Information:

ISP        : Maximilian Jacobsen
ASN        : AS206075 Maximilian Jacobsen
Host       : De Maximilian Jacobsen
Location   : Eygelshoven, Limburg (LI)
Country    : The Netherlands

## fio Disk Speed Tests (Mixed R/W 50/50):

Block Size | 4k            (IOPS) | 64k           (IOPS)
------   | ---            ----  | ----           ----
Read       | 258.21 MB/s  (64.5k) | 3.04 GB/s    (47.5k)
Write      | 258.89 MB/s  (64.7k) | 3.05 GB/s    (47.7k)
Total      | 517.11 MB/s (129.2k) | 6.09 GB/s    (95.2k)
|                      |
Block Size | 512k          (IOPS) | 1m            (IOPS)
------   | ---            ----  | ----           ----
Read       | 5.30 GB/s    (10.3k) | 6.83 GB/s     (6.6k)
Write      | 5.58 GB/s    (10.9k) | 7.28 GB/s     (7.1k)
Total      | 10.89 GB/s   (21.2k) | 14.12 GB/s   (13.7k)

## iperf3 Network Speed Tests (IPv4):

| Provider | Location (Link) | Send Speed | Recv Speed | Ping |
| --- | --- | --- | --- | --- |
| Clouvider | London, UK (10G) | 986 Mbits/sec | 523 Mbits/sec | 13.9 ms |
| Scaleway | Paris, FR (10G) | busy | busy | -- |
| NovoServe | North Holland, NL (40G) | 1.04 Gbits/sec | 991 Mbits/sec | 14.6 ms |
| Uztelecom | Tashkent, UZ (10G) | 407 Mbits/sec | 269 Mbits/sec | 93.5 ms |
| Clouvider | NYC, NY, US (10G) | 435 Mbits/sec | 393 Mbits/sec | 82.3 ms |
| Clouvider | Dallas, TX, US (10G) | 218 Mbits/sec | 36.2 Mbits/sec | 123 ms |
| Clouvider | Los Angeles, CA, US (10G) | busy | 240 Mbits/sec | 146 ms |

## iperf3 Network Speed Tests (IPv6):

| Provider | Location (Link) | Send Speed | Recv Speed | Ping |
| --- | --- | --- | --- | --- |
| Clouvider | London, UK (10G) | 995 Mbits/sec | 274 Mbits/sec | 13.7 ms |
| Scaleway | Paris, FR (10G) | busy | busy | 14.6 ms |
| NovoServe | North Holland, NL (40G) | 1.00 Gbits/sec | 948 Mbits/sec | 14.5 ms |
| Uztelecom | Tashkent, UZ (10G) | 98.5 Mbits/sec | 202 Mbits/sec | 92.9 ms |
| Clouvider | NYC, NY, US (10G) | 410 Mbits/sec | 335 Mbits/sec | 82.2 ms |
| Clouvider | Dallas, TX, US (10G) | 193 Mbits/sec | 207 Mbits/sec | 123 ms |
| Clouvider | Los Angeles, CA, US (10G) | 364 Mbits/sec | 366 Mbits/sec | 146 ms |

## Geekbench 6 Benchmark Test:

Test            | Value
|
Single Core     | 1364
Multi Core      | 4488
Full Test       | https://browser.geekbench.com/v6/cpu/3533427

YABS completed in 14 min 29 sec
  • dgc1980dgc1980

    here is the 2GB version

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
#              Yet-Another-Bench-Script              #
#                     v2023-09-06                    #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Mon Nov 13 18:54:37 UTC 2023

Basic System Information:
---------------------------------
Uptime     : 0 days, 1 hours, 49 minutes
Processor  : AMD EPYC 7702P 64-Core Processor
CPU cores  : 1 @ 1999.999 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM        : 1.9 GiB
Swap       : 2.0 GiB
Disk       : 48.8 GiB
Distro     : Ubuntu 22.04.3 LTS
Kernel     : 5.15.0-88-generic
VM Type    : KVM
IPv4/IPv6  : ✔ Online / ❌ Offline

IPv4 Network Information:
---------------------------------
ISP        : Maximilian Jacobsen
ASN        : AS206075 Maximilian Jacobsen
Host       : Maximilian Jacobsen
Location   : Eygelshoven, Limburg (LI)
Country    : The Netherlands

fio Disk Speed Tests (Mixed R/W 50/50):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ----
Read       | 83.74 MB/s   (20.9k) | 404.80 MB/s   (6.3k)
Write      | 83.96 MB/s   (20.9k) | 406.93 MB/s   (6.3k)
Total      | 167.70 MB/s  (41.9k) | 811.74 MB/s  (12.6k)
           |                      |
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ----
Read       | 533.38 MB/s   (1.0k) | 538.20 MB/s    (525)
Write      | 561.72 MB/s   (1.0k) | 574.04 MB/s    (560)
Total      | 1.09 GB/s     (2.1k) | 1.11 GB/s     (1.0k)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping
-----           | -----                     | ----            | ----            | ----
Clouvider       | London, UK (10G)          | 1.02 Gbits/sec  | 561 Mbits/sec   | --
Scaleway        | Paris, FR (10G)           | busy            | busy            | 13.3 ms
Clouvider       | NYC, NY, US (10G)         | 465 Mbits/sec   | 421 Mbits/sec   | --

Geekbench 6 Benchmark Test:
---------------------------------
Test            | Value
                |
Single Core     | 1322
Multi Core      | 1313
Full Test       | https://browser.geekbench.com/v6/cpu/3534256

YABS completed in 12 min 48 sec
  • yoursunnyyoursunny OG

    I notice that lg.nl. is now pointing to Eygelshoven.
    Does this mean the Dronten location is going to migrate to Eygelshoven?
    I have enough store credits to afford a big machine, but I don't want to end up with two machines in the same location.

    Would Black Friday bring dealz in Sweden location?

    We accept Karma donations for the last flan. 🍮 affbrr

  • MartinJackJennyMartinJackJenny

    Hello
    would you have BF promotion? Would Including ipv6 only plan? I really like your 9€/Year plan. It’s a fit plan for website with cdn.
    There is a promotion now, I’m so sorry that I’m afraid that this will replace bf promotion.

  • mxmlamxmla

    @yoursunny said:
    I notice that lg.nl. is now pointing to Eygelshoven.
    Does this mean the Dronten location is going to migrate to Eygelshoven?
    I have enough store credits to afford a big machine, but I don't want to end up with two machines in the same location.

    Would Black Friday bring dealz in Sweden location?

    Good catch ;) As the overall feedback towards our new NL location is good and we are unable to expand in Dronten we will migrate all existing Clients. All Clients will receive an E-Mail regarding this in the upcoming days. IPv4/IPv6 Addresses will not change. Migration is planned for March 2024 to give enough time. VPS will be offline for a few hours. Clients who want to avoid the downtime will be able to migrate with an "appointment" beforehand but with IPv4/IPv6 address change. This will be possible 4 weeks before the actual migration and only if enough stock is available.

    We have our own Rack in Eygelshoven with our own Routers now to get the flexibility we hadn't before regarding BGP, routed Subnets and so on.

    If you/somebody has more questions about this please ask :)

    No BF promotion planned ;)

    @MartinJackJenny said:
    Hello
    would you have BF promotion? Would Including ipv6 only plan? I really like your 9€/Year plan. It’s a fit plan for website with cdn.
    There is a promotion now, I’m so sorry that I’m afraid that this will replace bf promotion.

    No BF promotion planned ;)

    server-factory.com

  • FrankZFrankZ ModeratorOG
    edited November 2023

    @mxmla said: No BF promotion planned ;)

  • JabJab TOP Member 2027

    @mxmla said: No BF promotion planned

    SAD PANDA

    Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.

  • sh97sh97 Top MJJ

    @mxmla said: No BF promotion planned ;)

    The Ultimate Speedtest Script | Get Instant Alerts on new LES/LET deals | Cheap VPS Deals | VirMach Flash Sales Notifier
    FREE KVM VPS - FreeVPS.org | FREE LXC VPS - MicroLXC

  • yoursunnyyoursunny OG

    Migration notice email

    Hi push-up specialist!

    You are receiving this E-Mail as a Client with an active Virtual Server with server-factory.com at our Dronten, The Netherlands location.

    On 15.03.2024 at 18:00 CET we will migrate your Virtual Server to our new Eygelshoven, The Netherlands location.

    The IP addresses of your Virtual Server will not change. No Data will be lost. Please create a Backup beforehand.

    At 18:00 CET on 15.03.2024 we will instruct our Upstream in Dronten, The Netherlands to drop the announcements of our Subnets on their Routers.

    As soon this is done we will announce the Subnets on our own Routers in our new Eygelshoven, The Netherlands location.

    Afterwards we will shutdown all Virtual Server in Dronten, The Netherlands and remove the Servers from the Rack. We will transport the Servers from Dronten, The Netherlands to Eygelshoven, The Netherlands which takes around 3 hours.

    After arriving in Eygelshoven, The Netherlands we will install the Servers in our own Rack.

    The overall migration is expected to take 6 to 9 hours.

    In case an IP address change is acceptable for you and you want to avoid downtime:

    We offer a planned migration beforehand.

    From 16.02.2024 onward, it is possible to migrate. Please note that IP addresses are changed.

    We will migrate your Virtual Server and its Data to the new location.

    If you are interested, please reply to this E-Mail and we will schedule a migration appointment with you.

    Please note that the migration is only possible when there is stock of the same Plan in the new location. Storage VPS can't be migrated earlier.

    Thanks for your cooperation.

    If you have questions, please let us know.

    Kind regards,

    Maximilian Jacobsen from server-factory.com

    (GDPR notice deleted)

    We accept Karma donations for the last flan. 🍮 affbrr

  • ZuckZwingZuckZwing

    Any plan on restocking Sweden location soon?

  • cybertechcybertech OGBenchmark King YABS 24/7/365
    edited November 2023

    would be nice to have XXS with 2vCPU. LES exclusive maybe?

    I bench YABS 24/7/365 unless it's a leap year.

  • sh97sh97 Top MJJ

    @cybertech said:
    would be nice to have XXS with 2vCPU. LES exclusive maybe?

    +1
    Limited stock LES exclusive, and maybe even biennial payment?

    The Ultimate Speedtest Script | Get Instant Alerts on new LES/LET deals | Cheap VPS Deals | VirMach Flash Sales Notifier
    FREE KVM VPS - FreeVPS.org | FREE LXC VPS - MicroLXC

  • cyberpunkcyberpunk

    In Eygelshoven all plans are 1Gbit uplink at this time as far as I can tell.
    Will existing plans in Dronten with 2.5Gbit uplink such as from this promo have same 2.5Gbit uplink in Eygelshoven after migration or will be downgraded to 1Gbit?

  • mxmlamxmla

    @ZuckZwing said:
    Any plan on restocking Sweden location soon?

    We are sourcing hardware for another EPYC Node but we have no ETA yet. Let me know your E-Mail Address via PM and I can inform you as soon as it is ready.

    @cybertech said:
    would be nice to have XXS with 2vCPU. LES exclusive maybe?

    @sh97 said:

    @cybertech said:
    would be nice to have XXS with 2vCPU. LES exclusive maybe?

    +1
    Limited stock LES exclusive, and maybe even biennial payment?

    Let see what 2024 brings to us ;)

    @cyberpunk said:
    In Eygelshoven all plans are 1Gbit uplink at this time as far as I can tell.
    Will existing plans in Dronten with 2.5Gbit uplink such as from this promo have same 2.5Gbit uplink in Eygelshoven after migration or will be downgraded to 1Gbit?

    You will keep your 2.5 GBit Uplink ;)

    server-factory.com

  • BrueggusBrueggus OG

    @mxmla said:
    BGP Sessions are available free of charge for any Plan!

    One of my most flawless BGP experiences so far. I had no issues getting my session established and the prefixes I'm announcing became reachable within minutes. No need to wait for upstreams updating their filters. Huge thumbs up!

    dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/

  • yoursunnyyoursunny OG

    @mxmla said:

    @ZuckZwing said:
    Any plan on restocking Sweden location soon?

    We are sourcing hardware for another EPYC Node but we have no ETA yet.

    Starbucks ran out of coffee.
    McDonald's ran out of burgers.
    ServerFactory ran out of servers.

    We accept Karma donations for the last flan. 🍮 affbrr

  • JabJab TOP Member 2027

    Damn, I tried to persuade^C blackmail @mxmla into BF deals by withdrawing my affiliates and telling him I am gonna use it for buying competition and he just said "Happy buying".

    We doomed, he won't budge, no BF spirit from server-factory (-:

    Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.

  • yoursunnyyoursunny OG

    They won't even let me withdraw affiliate income.
    It needs SEPA number.
    I called Discover Bank and Wells Fargo Bank, but neither bank knows anything about a SEPA number.
    Revolut app has a SEPA number but I'm told it's invalid.
    So basically I have to spend affiliate income on another VPS, before the provider deadpools or gets an acquisition that wipes out store credits.

    We accept Karma donations for the last flan. 🍮 affbrr

  • JabJab TOP Member 2027
    edited November 2023

    wtf is SEPA number

    SEPA is transfer system, works on IBAN (+ BIC).
    Sure that your Murica banks are not in SEPA system (and SWIFT is expensive), but Revolut should work, they are even in SEPA Instant... however maybe not - you could be in some Revolut USA LTD. that it's outside SEPA system too. Mine Revolut (after 2 migrations - they started in UK I think, then Brexit) now it's a Lithuania bank :D

    Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.

  • yoursunnyyoursunny OG

    @Jab said:
    Sure that your Murica banks are not in SEPA system (and SWIFT is expensive), but Revolut should work, they are even in SEPA Instant... however maybe not - you could be in some Revolut USA LTD. that it's outside SEPA system too.

    Revolut gives BIC "REVOUS31" and 12-digit account number, but then it says "only SWIFT transfers are accepted" at the bottom.

    ACH is free and convenient.
    Every Murica bank has ACH.
    You send the money before 6pm, it'll be received when the bank opens the next morning.
    Why can't European banks join ACH to facilitate cross-Atlantic commerce?

    We accept Karma donations for the last flan. 🍮 affbrr

  • JabJab TOP Member 2027
    edited November 2023

    @yoursunny said: Revolut gives BIC "REVOUS31" and 12-digit account number, but then it says "only SWIFT transfers are accepted" at the bottom.

    Then yeah, your are on some USA branch of Revolut and no SEPA for ya.
    SWIFT is bad/expensive [aka 0,35% fee... but not less than 6€ for my bank for single transfer] so I am not shocked that mxmla don't want to send it and to add insult to injury it's half of the cost - sender pays half [up front], receiver pays half too [substracted from the amount you got] :D. Plus additional fees if bank accounts in wrong currency, lol.

    Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.

  • JabJab TOP Member 2027

    also as we derailed the topic

    BUY VPS, GOOD SHIT.

    Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.

  • MumblyMumbly
    edited November 2023

    @yoursunny said:
    Why can't European banks join ACH to facilitate cross-Atlantic commerce?

    Because ACH is used to make payments within the U.S. European banks can't do anything here.
    SEPA is the European Union's equivalent of ACH payments

    That’s despite a Feb. 22 notice tucked away on the Fed’s website that said “after thorough consideration and evaluation, Federal Reserve Financial Services has determined that FedGlobal ACH Payments service to Canada and Europe will be discontinued in the coming months.”

    https://www.paymentsdive.com/news/Federal-Reserve-fedglobal-ach-payments-program-reduced/648181/

  • terrorgenterrorgen OG
    edited November 2023

    Get Wise and open a euro balance account.
    Should be able to receive cash that way. IBAN and BIC supported.
    Need afflink? PM me.

    DM us for private tracker invite.

  • dwightdwight

    For BGP: Legacy resources may not have RPKI (e.g., net 44), so I guess they can't be announced via server-factory?

  • mxmlamxmla

    @dwight said:
    For BGP: Legacy resources may not have RPKI (e.g., net 44), so I guess they can't be announced via server-factory?

    Thanks for your question! That's correct. RPKI is mandatory.

    server-factory.com

  • saerlansesaerlanse

    After I place the order, do I reply to the order ASN and provide the IP here?

  • mxmlamxmla

    @saerlanse said:
    After I place the order, do I reply to the order ASN and provide the IP here?

    If you want to establish a BGP Session with us please open a Ticket after your order and provide your ASN and Subnets, thanks!

    server-factory.com

  • saerlansesaerlanse
    edited November 2023

    @mxmla said:

    @saerlanse said:
    After I place the order, do I reply to the order ASN and provide the IP here?

    If you want to establish a BGP Session with us please open a Ticket after your order and provide your ASN and Subnets, thanks!

    What are Subnets? How can I find it?

  • mxmlamxmla

    I guess we are on the wrong path here :) What do you want to accomplish?

    server-factory.com

  • ehabehab
    edited November 2023

    @mxmla said:
    I guess we are on the wrong path here :) What do you want to accomplish?

    he wants to give me one for free.
    a vps off course
    don't go that far.

  • terrorgenterrorgen OG

    Guess they just FOMO

    DM us for private tracker invite.

  • angstromangstrom OG

    @mxmla

    I may have missed this, but what control panel do you use?

    Also, is installation from a custom ISO possible?

    "A single swap file or partition may be up to 128 MB in size. [...] [I]f you need 256 MB of swap, you can create two 128-MB swap partitions." (M. Welsh & L. Kaufman, Running Linux, 2e, 1996, p. 49)

  • yoursunnyyoursunny OG

    @angstrom said:
    I may have missed this, but what control panel do you use?

    HostBill

    Also, is installation from a custom ISO possible?

    Yes

    We accept Karma donations for the last flan. 🍮 affbrr

  • mxmlamxmla

    We accept Bitcoin and Monero now via our own BTCPay Server :)

    server-factory.com

  • yoursunnyyoursunny OG

    Congratulations, you are part of the elite group in:
    Routed IPv6 Hall of Fame

    • TunnelBroker
    • BuyVM
    • GINERNET
    • Terrahost
    • webhosting24
    • Zappie Host
    • QuickPacket
    • EasyVM
    • Linode
    • HostCram
    • Clouvider
    • Stratagem Hosting
    • Hazi ro
    • Lite Server
    • HostHatch
    • Crunchbits
    • F4 Networks
    • Skhron
    • Virtury
    • ServerFactory (Eygelshoven)

    Include routed IPv6, at least /64 subnet, to get listed.

    We accept Karma donations for the last flan. 🍮 affbrr

  • angstromangstrom OG

    @mxmla

    If I may ask: do you block port 25 on these plans?

    If not, can rDNS be set?

    "A single swap file or partition may be up to 128 MB in size. [...] [I]f you need 256 MB of swap, you can create two 128-MB swap partitions." (M. Welsh & L. Kaufman, Running Linux, 2e, 1996, p. 49)

  • mxmlamxmla

    @angstrom said:
    @mxmla

    If I may ask: do you block port 25 on these plans?

    If not, can rDNS be set?

    Thanks for your question! We do block Mail Ports by default but Clients can delete the Firewall Rule blocking the Mail Ports via Client Area. rDNS is managed for the IPv4 address and the first IPv6 address from the /64 Subnet via Client Area as well :)

    server-factory.com

  • dgc1980dgc1980

    been noticing a lot of traffic on my server, while idle, nothing installed, ~30-50GB per day, decided to do some nethogs and tcpdumps

    and I am getting data from other services on the node,

    all the data is coming from the following..

    05:40:06.256698 IP static.221.242.4.46.clients.your-server.de.ssh > sf4.eygelshovennl.com.37722: Flags [.], ack 33958349, win 24576, options [nop,nop,TS val 2976492158 ecr 1616555695], length 0
05:40:06.257056 IP static.221.242.4.46.clients.your-server.de.ssh > sf4.eygelshovennl.com.37722: Flags [P.], seq 18580360:18580428, ack 33958349, win 24576, options [nop,nop,TS val 2976492158 ecr 1616555695], length 68
05:40:06.257413 IP static.221.242.4.46.clients.your-server.de.ssh > sf4.eygelshovennl.com.37722: Flags [P.], seq 18580428:18580520, ack 33958349, win 24576, options [nop,nop,TS val 2976492158 ecr 1616555695], length 92
05:40:06.257771 IP static.221.242.4.46.clients.your-server.de.ssh > sf4.eygelshovennl.com.37722: Flags [.], ack 33962513, win 24576, options [nop,nop,TS val 2976492158 ecr 1616555695], length 0
05:40:06.258101 IP static.221.242.4.46.clients.your-server.de.ssh > sf4.eygelshovennl.com.37722: Flags [P.], seq 18580520:18580588, ack 33962513, win 24576, options [nop,nop,TS val 2976492158 ecr 1616555695], length 68
05:40:06.258456 IP static.221.242.4.46.clients.your-server.de.ssh > sf4.eygelshovennl.com.37722: Flags [P.], seq 18580588:18580656, ack 33962513, win 24576, options [nop,nop,TS val 2976492158 ecr 1616555695], length 68

    really strange, the sf4.eygelshovennl.com is 31.41.249.108 and this is where all my incoming data is coming from anohter server-factory IP address. so there is a leak in the network somewhere if I am able to capture this

Sign In or Register to comment.